الملف النحاسي بوش الخاص بالمحركات (GBH220) موديل (PTW1616B10269)

- Genuine Bosch replacement part for seamless compatibility with the GWS700 - Premium materials for durability under demanding tasks - Efficient power transfer to maintain steady performance - Easy installation to minimize downtime - Cost-effective maintenance option compared with replacing the entire tool - Built to endure harsh working conditions and provide long-lasting reliability - Helps prevent further damage by restoring proper motor loading and operation

This field is specifically designed as the replacement part for the Bosch GWS700 angle grinder. For compatibility with other Bosch models, refer to the product listings on Fepy and verify model numbers before purchase.

Recommended steps: 1) Unplug the tool and ensure it’s completely powered down. 2) Open the grinder housing and locate the field assembly. 3) Disconnect any wiring to the old field, remove mounting screws, and lift the old field out. 4) Position the new field and secure it with the appropriate fasteners. 5) Reconnect wiring exactly as the original configuration and reassemble the housing. 6) Refit the tool to test for proper operation. If you’re unsure, consult a qualified technician.

Use cases include repairing a worn or failing field in a GWS700, refurbishing a second-hand grinder, restoring power consistency after motor wear, and performing preventive maintenance to extend overall tool life.

Safety tips: unplug the tool before opening the housing, wear eye and hand protection, work on a stable surface, avoid contact with moving parts, and ensure wiring connections are correct to prevent shorts. If you’re uncertain, seek professional assistance.

Consider these compatible alternatives on Fepy for comparison (verify compatibility with your exact model): - Bosch PTW1619Pb4413 Field for GWS700 – https://fepy.com/product/bosch-ptw1619pb4413-field-gws700 - Bosch PTW1619 Field for GWS700 (OEM-style replacement) – https://fepy.com/product/bosch-ptw1619-field-gws700-variant Note: Always confirm model compatibility on the product page before purchasing.

Regular checks are key: inspect for signs of overheating or wear, ensure electrical connections remain tight and clean, avoid exposure to moisture, and perform periodic inspections during tool maintenance. Clean the exterior housing and avoid contaminating the field with dust or debris during use.

Confirm that the part number (PTW1619Pb4413) matches your Bosch GWS700’s original field, and verify the tool’s model number on the grinder label. If in doubt, compare the mounting points, wiring layout, and dimensions with the existing field to ensure a proper fit.

Yes. Replacing the field is typically a more economical option than purchasing a new grinder. It restores tool performance without the higher cost of a full tool replacement, and it can extend the life of your existing equipment.

If you’re comfortable with basic tool disassembly and electrical connections, you can replace the field yourself by following the installation steps. If you’re unsure about wiring or safety, a certified technician is recommended to prevent damage and ensure correct installation.