ريشة (لقمة) المثقاب بوش قياس (6X210mm) من النوع (SDS Drill)

SDS Plus is a quick-change shank system used by rotary hammers. It allows fast, secure bit changes and improved power transfer, reducing downtime and increasing drilling efficiency.

Diameter: 6 mm; Length: 210 mm; Shank: SDS Plus; Tip: carbide for long life; Vibration reduction through SDS design; Compatible with SDS rotary hammers.

Best suited for concrete, masonry (brick and block) and stone. It works well for deep holes in these materials, with performance optimized for tough substrates.

1) Make sure the tool is off. 2) Insert the bit shank into the SDS chuck until it seats with a secure click. 3) Set the correct hammer mode and speed for the material. 4) Apply steady, moderate pressure and let the bit do the work. 5) After drilling, withdraw the bit carefully.

Keep the bit cool by avoiding prolonged high-speed drilling in hard material, use appropriate drilling speed, avoid binding, and replace the bit if the carbide tip shows significant wear or chipping.

Anchoring holes and fastening points in concrete walls, drilling into masonry for electrical or plumbing runs, and deep-hole tasks in renovation or construction projects requiring robust, deep reach.

This Bosch S3 6x210mm offers durability with a carbide tip and SDS Plus shank for quick changes. For alternatives on Fepy, you can explore the Bosch S4 6x210mm (often offering similar performance with a focus on longer life) and the Bosch S3 6x260mm (same brand line with deeper reach).

Wear eye protection, hearing protection, and gloves. Secure the workpiece, ensure proper dust extraction if available, and follow your tool’s safety guidelines. Avoid overheating and excessive side loading to prevent bit failure.

Yes. The carbide tip, optimized cutting edges, and SDS Plus compatibility deliver durable performance and faster drilling in tough materials, which can reduce downtime and long-term replacement costs.

If you need deeper holes or different diameters, consider other Bosch SDS Plus variants in the same family, such as 6x260mm for deeper reach or other diameter options. Examples (available on Fepy):

It’s compatible with SDS Plus rotary hammers that accept SDS Plus shanks. Always check your tool’s manual for shank compatibility and recommended usage.

The combination of a 6 mm carbide-tipped bit, 210 mm length for deep reach, and the SDS Plus quick-change system provides efficient drilling, longer tip life, and reduced downtime in demanding concrete and masonry tasks.