بطارية بدء التشغيل من (Bosch) استطاعة تدوير (480A) و بأمبير ساعي (56AH) قياس (12V) موديل (DIN S3- BSB0092S30550)

Nominal voltage: 12V; Capacity: 56Ah; Cold‑cranking amps: 480A; Maintenance‑free lead‑acid with a polypropylene case; DIN S3 size/fitment; separate positive and negative terminals with a gas relief valve.

Yes. It is designed as a maintenance‑free, sealed lead‑acid battery that does not require periodic electrolyte refilling.

DIN S3 is a standard size and fitment specification used by certain vehicle models. It ensures the battery will fit in cars or vans that accept DIN S3‑type batteries, but you should verify the tray size and terminal layout to ensure a proper match.

1) Park on a flat surface and disconnect the negative terminal first, then the positive. 2) Remove the old battery and clean the tray. 3) Place the new battery in the tray with terminals oriented correctly. 4) Connect the positive terminal first, then the negative, and tighten the clamps securely. 5) Dispose of the old battery at an approved recycling point.

Wear eye protection and gloves, avoid sparks and flames near the battery, keep the terminals clean and tight, and never tilt the battery to prevent electrolyte leakage. If you notice any cracks or damage, replace it immediately.

It's well suited for mid‑to‑large 12V passenger cars and light commercial vehicles that require solid starting power, especially where a reliable 480A cold‑cranking performance is beneficial.

If you need a bit more cranking power, compare with Bosch DIN S3 12V 60Ah 540A. If you want slightly lower capacity, consider Bosch DIN S3 12V 55Ah 480A. Product pages are available here: https://fepy.com/product/bosch-din-s3-12v-60ah-540a and https://fepy.com/product/bosch-din-s3-12v-55ah-480a

Lifetime depends on climate, driving patterns, and maintenance. In normal conditions, a high‑quality 12V car battery like this can last several years with proper care and regular checks of terminal cleanliness and charging health.

Check your current battery’s DIN S3 fitment or measure the length, width, and height to match the DIN S3 dimensions. Also verify terminal positions and polarity to ensure compatibility with your vehicle’s wiring.

Yes, there are return options for suitable batteries within the platform’s stated return terms. For specifics, refer to the supported return policy details and any applicable conditions at the time of purchase.