Question 1

What is the Bosch 4.5" Steel Cutting Disc 1mm designed for?

Accepted Answer

It’s built for fast, precise, and clean cuts on metal surfaces. With a 4.5" diameter and 1mm ultra-thin profile, it delivers low vibration, minimal burr, and smooth edges, making it suitable for professional fabrication, construction, and repair tasks when used with an angle grinder.

Question 2

What materials can it cut?

Accepted Answer

Designed for ferrous metals, including steel and stainless steel, as well as other metal surfaces typically cut with angle grinders.

Question 3

Why choose a 1mm thickness? What are the benefits?

Accepted Answer

A 1mm thickness reduces kerf, allowing faster cutting with less resistance. This leads to quicker cuts, less material wastage, and smoother edges, especially on thinner sections of metal.

Question 4

What size is the disc and what grinders will it fit?

Accepted Answer

The disc is 4.5 inches in diameter and is described as universally compatible with most standard angle grinders. It fits common arbor sizes and guards found on many grinders.

Question 5

What makes its cutting fast and clean?

Accepted Answer

The combination of a high-quality abrasive material and the ultra-thin 1mm profile enables fast cutting action, while the design helps minimize burr formation and maintain clean edges under heavy loads.

Question 6

How do I install this disc on an angle grinder?

Accepted Answer

1) Power off and unplug the grinder. 2) Remove the existing disc and inspect the arbor for damage. 3) Align the disc with the grinder’s arbor and any alignment marks. 4) Securely tighten the nut and ensure the guard is in place. 5) Spin the disc by hand to check for wobble before use.

Question 7

How should I use it to minimize heat buildup and burr formation?

Accepted Answer

Use steady, moderate pressure and allow the disc to do the cutting rather than forcing it. Maintain a consistent feed rate, avoid overheating by taking light passes, and let the tool cool between heavy cuts. Keep the guard in place and use proper PPE.

Question 8

What safety precautions should I follow when using this disc?

Accepted Answer

Always wear eye protection, hearing protection, and gloves. Ensure the grinder’s guard is installed, inspect the disc for cracks or damage before use, and never use a damaged or shattering disc. Work in a clean, dry area and keep bystanders away.

Question 9

What are common use cases for this disc?

Accepted Answer

Ideal for fabrication, construction, and repair work that requires fast and clean cuts in steel, stainless steel, and other ferrous metals. Suitable for cutting through metal sheets, bars, profiles, and structural components.

Question 10

How does this disc compare to similar options on Fepy.com?

Accepted Answer

Compared to similar 4.5" discs, the 1mm Bosch cuts very quickly with minimal kerf and burrs. For alternatives on Fepy.com, you can check these options:
- Bosch 4.5" Steel Cutting Disc 1.2mm: https://fepy.com/product/bosch-4-5-steel-cutting-disc-1-2mm
- Makita 4.5" Steel Cutting Disc 1mm: https://fepy.com/product/makita-4-5-steel-cutting-disc-1mm
- DeWalt 4.5" Steel Cutting Disc 1mm: https://fepy.com/product/dewalt-4-5-steel-cutting-disc-1mm
Note: 1.2mm discs tend to last longer under heavier loads, while 1mm discs prioritize speed and edge quality.

Question 11

Is this disc a good value for professional use?

Accepted Answer

Yes. It offers fast cutting, cleaner edges, reduced material waste, and durability designed for repeated use, making it a cost-effective choice for professional or serious DIY metalworking tasks.

Question 12

How can I tell if the disc is worn or needs replacing?

Accepted Answer

Inspect for visible signs of wear such as deep grooves, glazing, cracks, chips, or significant wobble. If the edge looks uneven, the disc vibrates abnormally, or you notice increased smoke or heat without effective cutting, replace it immediately to avoid unsafe operation.

قرص القص الفولاذي من بوش قطر (4.5" ) و سماكة 1MM

Features & Benefits

Specification

Attachments

Frequently Asked Questions