Question 1

What’s included in the BSD 4100411 HRC 4 Power Arc Flash Kit?

Accepted Answer

The kit includes an arc flash hood, jacket, dungarees, gloves, and a storage bag. It’s designed to provide HRC 4 protection at 40 cal/cm² for high-risk arc flash environments.

Question 2

What standards and materials back up its protective performance?

Accepted Answer

Protection relies on a two-layer aramid construction: outer layer (~240 g/m²) and inner layer (~170 g/m²) with 75% aramid (Nomex), 13% modacrylic, 10.5% cotton, and 1.5% antistatic. It meets EN ISO 11611:2015 class 2-A1 welding protection, ISO 11092 (RET 7.10 m²·Pa/W), and EN ISO 15797 washing for industrial care.

Question 3

What work scenarios is this kit best suited for?

Accepted Answer

It's ideal for high-energy arc flash hazards in electrical work such as switchgear maintenance, terminations, panel upgrades, and other hazardous environments where arc flash protection at 40 cal/cm² is desired.

Question 4

How do I correctly put on and take off the kit?

Accepted Answer

Don the hood first, then the jacket and dungarees, followed by the gloves. When finished, doff in the reverse order and store all pieces in the included storage bag. Always follow your site’s PPE donning and doffing procedures.

Question 5

How should I clean and care for the kit to maintain protection?

Accepted Answer

Machine washing is supported per EN ISO 15797 for industrial washing. Use appropriate settings for aramid fabrics, avoid chlorine bleach, and dry according to the care label instructions to preserve fabric integrity and protection levels.

Question 6

How does HRC 4 protection compare to HRC 3 kits?

Accepted Answer

HRC 4 provides higher protection (up to 40 cal/cm²) than HRC 3 kits, which typically offer lower protection levels. This kit is designed for environments with higher arc flash risk.

Question 7

What are some comparable arc flash kits on Fepy.com and how do they differ?

Accepted Answer

If you’re considering alternatives on Fepy.com, you can compare against:
- BSD 4100410 HRC 4 Power Arc Flash Kit, Large: https://fepy.com/product/bsd-4100410-hrc-4-power-arc-flash-kit-40calcm2-large
- BSD 4100412 HRC 4 Ultra-Light Arc Flash Kit, Medium: https://fepy.com/product/bsd-4100412-hrc-4-ultra-light-arc-flash-kit-40calcm2-medium
- BSD 4100413 HRC 3 Arc Flash Kit, 30 cal/cm², Medium: https://fepy.com/product/bsd-4100413-hrc-3-arc-flash-kit-30calcm2-medium
These provide you different protection levels or weights while maintaining arc flash safety.

Question 8

What are the key fabric and construction specs I should know?

Accepted Answer

Total fabric weight is 410 g/m², derived from outer layer 240 g/m² and inner layer 170 g/m². The kit uses 75% aramid (Nomex), 13% modacrylic, 10.5% cotton, and 1.5% antistatic material. A dedicated bag is included for transport and storage.

Question 9

Can I pair this kit with other PPE from Fepy, such as gloves or face shields?

Accepted Answer

Yes. This kit is designed to be complemented by additional arc flash PPE sold separately on Fepy, such as compatible arc flash gloves, face protection, and footwear accessories to meet site-specific requirements.

Question 10

What is the return policy for this kit?

Accepted Answer

Fepy offers a standard return policy for eligible PPE. If you’re not satisfied, you can initiate a return within the applicable window and in accordance with the stated conditions for PPE items.

Question 11

Is the storage bag included useful for transporting and storing the kit?

Accepted Answer

Yes. The kit includes a dedicated storage bag to keep all components organized, protected, and easily portable between job sites.

مجموعة معدات الوقاية الشخصية من القوس الكهربائي (BSD) بمعامل حماية (40Cal/Cm2) قياس (Medium)

Features & Benefits

Specification

Attachments

Frequently Asked Questions