قرص القص من جيباس (GPA59247) قياس (115mmx22.2mm) مع حبيبات أكسيد الألومنيوم متوافق مع جميع الآلات ذات الحجم ("4.5) و مخصص للكشط وإزالة الصدأ

Key specs: 115 mm diameter, 22.2 mm bore (center hole), aluminium oxide grit, reinforced flap construction for longer wheel life, and a design that minimizes dust clogging and vibration for smoother operation. It’s suitable for use with all 4.5" angle grinders.

It’s intended for metal surfaces, including coatings, rust, burrs, and deburring tasks. The aluminium oxide grit provides robust performance on ferrous metals and related coatings commonly found on metalwork.

Ensure the grinder is powered off and unplugged. Align the flap disc bore (22.2 mm) with the grinder’s spindle, place the disc between the appropriate flanges, and tighten the nut securely. Use a flat mounting surface and avoid overtightening.

It features reinforced flap construction and high-grade aluminium oxide grains, which contribute to a longer wheel life and steady grinding performance, even on tougher deburring and rust-removal tasks.

Use light to moderate pressure—let the disc do the work. Maintain a steady, even speed within your grinder’s rated RPM, keep the workpiece clean to reduce dust clogging, and periodically flip or rotate the disc if your grinder allows it to even wear.

Wear safety glasses or a face shield, hearing protection, gloves, and a dust mask or respirator. Ensure the work area is well-ventilated and secure the workpiece to prevent kickback.

Ideal for rust removal, removing coatings, deburring sharp edges, and blending/smoothing welds or metal surfaces to prepare for finishing or painting.

Select 115 mm when you’re working in tighter spaces or on smaller components where a larger diameter would be impractical. Check that your grinder supports the 22.2 mm bore and that the disc diameter matches your intended finish area and grinder guard clearance.

Regularly inspect for cracks, tears, or excessive wear in the flap layers. If you notice glazing, glazing of the abrasive surface, or significant vibration, replace the disc. Keep the disc clean of built-up dust and avoid grinding through protective coatings that could compromise safety.

This disc uses aluminium oxide grit with reinforced flap construction for longer life and smoother operation. For quick comparisons with other 115 mm flap discs on Fepy, you can explore the flap discs collection and search results on Fepy to see similar options: https://fepy.com/collections/flap-discs and https://fepy.com/search?q=flap+disc+115mm

Yes, it’s designed to handle standard metal surfaces involved in deburring, rust removal, and coating removal. For specialized alloys or delicate finishes, test on a small area first and adjust pressure and pass count accordingly.