أنبوب بلاستيكي (PVC) قطر (2.5") طول (5.8M) بتصنيف (Cl-10)

Key specs: diameter 2.5 inches, length 5.8 meters, material PVC, CL-10 pressure rating, smooth inner wall for efficient flow, weather and corrosion resistant, suitable for outdoor use, and easy to cut and install.

Yes, the pipe is described as suitable for hot and cold drinking water and chemicals due to its PVC formulation and leak-proof design. Always verify chemical compatibility with the specific fluid and follow safe installation practices.

Common use cases include home plumbing lines, irrigation setups, main water supply runs, and drainage or sewage lines in outdoor or semi-outdoor environments. Its lightweight design makes it convenient for DIY projects as well.

Installation steps: (1) measure and mark where the pipe will run, (2) cut to length with a PVC cutter, deburr the cut ends, (3) dry-fit to ensure alignment, (4) apply PVC primer to the pipe ends and fittings, (5) apply PVC cement and connect fittings, (6) align and hold until dry, (7) add supports/clamps at recommended intervals, and (8) test for leaks after assembly.

Wear eye protection and gloves when cutting or gluing. Use PVC cement in a well-ventilated area and follow product instructions. Store pipe away from heat sources and sunlight when possible. Dispose of scrap pieces responsibly and ensure joints are fully cured before pressurizing any system.

The CL-10 2.5" x 5.8m pipe offers a balance of higher pressure resistance, outdoor durability, and fewer joints due to its length. Compare price per meter and the need for fewer fittings against other PVC pipes with different diameters or lengths to judge value for your specific project.

Comparison: the 3" pipe provides a larger bore for greater flow but requires larger fittings and more support. The 2.5" pipe discussed here is lighter, easier to handle, and often sufficient for many residential applications. For the 3" option, see: https://fepy.com/product/cl-10-pvc-pipe-3in-6m

Comparison: the 2" pipe is smaller in diameter, resulting in lower flow capacity but may be adequate for smaller irrigation lines or accessories. The 2.5" pipe offers higher flow without a large jump in handling effort. For the 2" option, see: https://fepy.com/product/cl-10-pvc-pipe-2in-5m

Use PVC solvent-weld fittings compatible with CL-10 PVC pipes, such as couplings, elbows, tees, and end caps matching the 2.5" diameter. Ensure you use the appropriate primer and cement to create leak-proof joints, and select clamps or supports suitable for the pipe length and environment.

Cut squarely with a proper PVC cutter, deburr edges, dry-fit connections, then bond with PVC primer and cement. Regularly inspect joints for signs of leakage or cracks, and re-tighten or replace fittings as needed. Keep exposed sections protected from direct UV exposure where possible.

Yes, you can explore other CL-rated PVC pipes of different diameters and lengths on Fepy. For example, the 3" and 2" CL-10 PVC Pipe variants are available at: 3in option: https://fepy.com/product/cl-10-pvc-pipe-3in-6m and 2in option: https://fepy.com/product/cl-10-pvc-pipe-2in-5m. Compare specs to choose the best fit for your project.