أنبوب بلاستيكي (PVC) بدرجة (Cl-E) طول (6M) قياس (2")

Key specs: 2 inch (approximately 50.8 mm) diameter, 6 meters in length, made from PVC for corrosion resistance (10–20x higher than metal pipes in corrosion resistance), flexible yet strong, and designed to be cut, glued, bent, and installed with standard PVC fittings. It is Class-E rated for electrical-related applications.

Installation steps: measure and cut the pipe to the needed length, deburr the edges, prime the cut ends, apply PVC cement, fit with appropriate PVC fittings, and allow solvent to cure. Support the pipe properly and join it using compatible connectors designed for 2" PVC pipes.

It's well-suited for carrying water lines, sewage and drainage systems, irrigation setups, and larger-scale residential, agricultural, or industrial plumbing projects where a sturdy 2" pipe is required.

The Class-E rating indicates suitability for certain electrical-related applications and environments where electrical compatibility matters. Use the pipe with appropriate fittings and follow local codes when combining with electrical layouts.

You’ll typically need a pipe cutter or hacksaw, PVC primer and cement, a measuring tape, marker, deburring tool, and matching 2" PVC fittings (elbows, tees, couplings, adapters). Have clamps or supports on hand to secure the pipe properly.

Compared with similar 2" PVC pipes on Fepy, this 6 meter Class-E pipe offers a longer continuous length and electrical-grade suitability. For alternatives, see these examples: - 2in PVC Pipe 6m Class-E (URL: https://fepy.com/product/2in-pvc-pipe-6m-class-e) - 2in PVC Pipe 6m Standard Grade (URL: https://fepy.com/product/2in-pvc-pipe-6m-standard) - 2in PVC Conduit Pipe 6m (URL: https://fepy.com/product/pvc-conduit-2in-6m) Note: choose based on your project needs, whether you require Class-E features, conduit use, or standard drainage suitability.

Common uses include water distribution in residential or agricultural settings, drainage and sewage lines, irrigation networks, and projects where a robust 2" PVC conduit-like pipe is appropriate. It’s versatile for both indoor and outdoor installations.

Cut the pipe square using a pipe cutter or fine-tooth saw, deburr the edges, dry-fit the alignment, then glue with PVC primer and cement following the product’s compatibility guidelines. Use appropriate fittings and ensure all joints are fully seated and cured before pressurizing the system.

Yes, PVC pipes are highly resistant to corrosion and are designed to withstand varying weather conditions. For long-term outdoor exposure, ensure proper supported installation and protection from direct UV exposure if required by your local codes.

This product can be returned in accordance with Fepy’s return policy. If you need to return it, follow the platform’s standard return process within the allowed timeframe and condition guidelines.

Choosing 2" x 6m provides a longer continuous run with fewer joints, reducing potential leak points and installation complexity. The 2" diameter supports substantial flow for many residential and light industrial applications, while its corrosion resistance and Class-E suitability add flexibility for mixed-use installations.