Cosmoplast UPVC Elbow 87° 75mm, Grey, Rigid Chemical-Resistant, Smooth Radius

Key specs include: 75 mm nominal size, 87° angle, PN16 pressure rating for medium-pressure pipe systems, corrosion resistance, UV resistance for outdoor use, smooth internal bore for self-cleansing flow, and solvent-weld sockets for leak-tight, flame-free joints.

PN16 indicates the elbow is suitable for medium-pressure piping, helping ensure safe operation within its rated pressure. It guides you to pair the elbow with compatible PN16 UPVC pipes and fittings for a secure, code-compliant installation.

For a secure solvent-weld joint: clean and dry the pipe ends, apply a suitable primer to the pipe and socket, apply solvent cement evenly, insert the pipe into the socket with a slight twisting motion, and hold briefly until the joint sets. Ensure proper alignment and avoid twisting after insertion.

Yes, it is UV-resistant for outdoor installations. For prolonged exterior exposure, consider using UV-protective measures or housings as recommended by local codes to extend service life in harsh sun.

An 87° bend provides a near-right-angle turn, which helps fit constrained spaces while maintaining a relatively straight flow path. It’s important to plan the layout to minimize flow resistance and ensure smooth insertion of pipes into the elbow.

Yes, this elbow is designed for compatibility with standard 75mm UPVC solvent-weld systems. Always verify that the pipe SDR/PN and the solvent cement match the elbow’s specifications for a proper, leak-free joint.

Ideal for residential waste and vent lines, as well as small-scale industrial plumbing where a sharp direction change is needed. It’s well-suited for UAE villas and low-rise buildings where corrosion resistance and durable, leak-tight joints are important.

Consider the material quality, UV resistance for outdoor use, the PN16 rating for your system, and the 87° angle to match your layout. Also compare cost, availability, and lead times against other 75mm UPVC elbows on Fepy to maximize value.

If you’re exploring options, you can consider similar 75mm UPVC elbows with different angles or brands on Fepy. For example, you might look at: 1) Cosmoplast UPVC Elbow 75mm 90° Grey: https://fepy.com/product/upvc-elbow-75mm-90deg-grey-cosmoplast 2) Astral UPVC Elbow 75mm 87° Grey: https://fepy.com/product/astral-upvc-elbow-75mm-87deg-grey 3) Another 75mm UPVC 87° option: https://fepy.com/product/upvc-elbow-75mm-87deg-grey-cosmoplast

Periodically inspect joints for signs of leaks or movement, ensure UV protection for exterior runs, and verify that solvent-weld joints remain clean and free from debris. Replace any damaged fittings promptly to maintain system integrity.

Confirm that the pipe diameter matches 75 mm and that the system is designed for PN16. Dry-fit the components first to check alignment, then complete the solvent-weld process with appropriate primers and cement. Avoid forcing joints to prevent cracks or leaks.