بخاخ اللحام المضاد للتناثر (CRC) كود (32318) سعة (500ML) – يباع بكرتونة من (12) عبوة

It comes as a 500 ml aerosol can, with packaging of 12 cans per carton. The formula is non-flammable, non-conductive, non-corrosive, odorless, silicone-free, and has extremely low VOC content for better workspace protection. It is designed to be non-staining and safe on most metals and alloys.

Yes. The spray is formulated to shield surfaces during MIG, TIG, and flux-core welding processes, helping to prevent spatter buildup and reduce cleanup time.

Shake the can well, hold it about 8–12 inches (20–30 cm) from the work surface, and apply a light, even coat over the area to be welded. Allow it to dry quickly before starting to weld. Reapply as needed before each welding pass.

The formula is designed to be safe on most metals and alloys, with non-staining properties. For sensitive or specialty coatings, test on a small inconspicuous area first.

CRC Anti Spatter Spray 500 ml offers fast drying, low VOC, odorless operation, and silicone-free formulation, which can provide a smoother welding experience. For reference comparisons on Fepy, you can review similar products such as: CRC Anti Spatter Spray 400 ml: https://fepy.com/product/crc-anti-spatter-spray-400ml; Loctite Anti-Spatter Spray 400 ml: https://fepy.com/product/loctite-anti-spatter-spray-400ml; 3M Anti-Spatter Spray 400 ml: https://fepy.com/product/3m-anti-spatter-spray-400ml.

Use in a well-ventilated area. Keep away from heat sources and open flames. Avoid contact with skin and eyes; if contact occurs, rinse thoroughly with water. Store upright in a cool, dry place away from direct sunlight. Properly dispose of empty cans according to local regulations.

Store the cans upright in a cool, dry place away from heat sources and direct sunlight. Keep caps on when not in use to prevent accidental spraying and evaporation.

The 500 ml cans combined with carton packaging of 12 units can lower per-unit cost for bulk purchases. Its fast-drying, low VOC, non-conductive, odorless, and silicone-free formula adds ease of use and workspace safety, which can reduce cleanup time and improve overall workflow.

Once welding is complete, any remaining surface residue can typically be wiped clean or removed with light cleaning, followed by standard post-weld surface finishing if needed. The spray is designed to minimize spatter adhesion, which generally reduces grinding and cleanup time.