كماشة ضغط أطراف معزولة من ساتا (GL91105)

The tool uses color-coded jaws to cover a range of wire sizes: Red jaw for 22–18 AWG (approximately 5–15 mm²), Blue jaw for 16–14 AWG (approximately 11–25 mm²), and Yellow jaw for 12–10 AWG (approximately 4–6 mm²). Match the jaw color to your wire size for consistent, secure crimps.

The pliers are built from high-carbon steel with a corrosion-resistant coating for durability, and they feature fiberglass-reinforced handles with an ergonomic, non-slip grip to reduce hand fatigue during extended use.

The tool is designed with adjustable crimping pressure to accommodate different terminal sizes. Start with a light setting and increase gradually while testing with scrap terminals to achieve clean, secure crimps without damaging the connector or wire.

1) Select the correct color jaw for your wire size. 2) Insert the insulated terminal wire into the terminal crimp area until seated. 3) Squeeze the handles smoothly until the integrated ratchet completes its cycle, producing a uniform crimp. 4) Release and inspect the crimp for a secure, flush fit.

Yes. The SATA GL91105 is designed for wide compatibility, including electrical, automotive, and industrial wiring applications, thanks to its adjustable pressure, precise jaws, and durable construction.

The ratchet ensures a consistent, complete crimp every time. It prevents partial crimps and helps you achieve uniform compression across all terminals, improving reliability.

After use, wipe away any dirt or residue and lightly oil moving parts to keep them operating smoothly. Store in a dry place away from moisture. Periodically check the jaws for wear and re-torque or recalibrate the crimping pressure if needed.

Wear eye protection, keep fingers clear of the jaws, and use the correct jaw for your wire size. Use the locking feature when the tool is not in use, and avoid forcing the tool beyond its rated crimping range to prevent damage.

Choose red for 22–18 AWG (5–15 mm²), blue for 16–14 AWG (11–25 mm²), and yellow for 12–10 AWG (4–6 mm²). Using the correct jaw ensures a proper bite on the conductor and a reliable, secure crimp.

If you’re exploring options on Fepy, you can check alternatives such as: 1) Insulated Terminal Crimping Pliers Red 22-18 AWG – https://fepy.com/product/insulated-terminal-crimping-pliers-red-22-18awg 2) High-Carbon Steel Crimping Tool with Ratchet – https://fepy.com/product/high-carbon-steel-crimping-tool-ratchet 3) Terminal Crimping Pliers Set for Electrical Work – https://fepy.com/product/terminal-crimping-pliers-set These tools vary in jaw color codes, wire size ranges, and whether they include sets or single tools, so compare jaw options, build quality, and user reviews to choose the best fit.

Yes. Use the correct jaw for your wire size, apply steady pressure without forcing the tool, keep the tool clean and lightly oiled, and store it dry. Regularly inspect the jaws for wear and recalibrate the crimping pressure if you notice inconsistent crimps.