ورقة لاصقة لامعة من دي سي فيكس (DC Fix) لون رمادي مقاس (45cmx15m) مثالية للمشاريع المنزلية والأعمال اليدوية

Key specs: size is 45 cm x 15 m; finish is plain gloss grey; durable adhesive for secure bonding to wood, glass, metal, and other smooth surfaces; water-resistant for kitchens and bathrooms; peel-and-stick application with no tools required; easy to trim to fit irregular shapes.

Steps: 1) Clean and dry the surface. 2) Measure and cut a piece slightly larger than your area. 3) Peel back a small section of the backing and apply the sheet, using a roller or credit card to smooth from the center outward. 4) Remove the backing gradually while pressing to avoid air bubbles. 5) Trim excess with a sharp knife. 6) Burnish edges to secure a tight seal. For curves, gently stretch the film and work slowly around corners.

It bonds well to smooth, clean surfaces such as finished wood, particleboard, glass, metal, and some plastics. For best results, avoid powdery or highly textured surfaces, and ensure the area is free from dust, oil, and previous finishes that could impair adhesion.

Yes. The sheet can be trimmed with scissors or a craft knife. For curved edges, cut slightly larger and carefully bend or stretch the material as you apply, then trim to achieve a clean fit.

The sheet is designed for a strong, long-lasting bond, but it is still possible to reposition briefly during installation. Once pressed firmly into place, it adheres securely. Removal may leave residue on porous surfaces, so test on a small area first and use a mild adhesive remover if needed.

The Grey Gloss sheet is water-resistant and designed for everyday use. It’s suitable for kitchens and bathrooms where surfaces may encounter moisture, but avoid prolonged exposure to direct water on large flat areas and heat sources to maintain the finish.

Clean with a soft, damp cloth. Avoid abrasive or solvent-based cleaners that could dull the glossy finish. If you notice air bubbles, gently re-press and smooth them out with a soft roller or cloth.

Grey gloss offers a contemporary, reflective look ideal for modern interiors. If you prefer a different vibe, DC Fix also offers white gloss and matte grey options (and patterned finishes) that create distinct effects. For example, you can explore white gloss here: https://fepy.com/product/dc-fix-plain-gloss-adhesive-sheet-white-45cm-x-15m and matte grey here: https://fepy.com/product/dc-fix-plain-matte-adhesive-sheet-grey-45cm-x-15m to compare finishes and textures.

Use it to refresh cabinet doors, drawer fronts, shelving, picture frames, book covers, or to create an accent wall. It’s also great for refurbishing old furniture, updating desk surfaces, or crafting custom signage and décor pieces with a glossy, modern finish.

One roll is 45 cm wide by 15 m long, which equals about 6.75 square meters of coverage. Depending on project sizes (for example, cabinet doors, panels, or frames), you can estimate how many surfaces you can refresh. Smaller DIY projects (frames, small boxes) will use less material per piece, while larger panels will require more cut pieces.

The adhesive sheet is designed for indoor use and is non-toxic per typical consumer product standards. As with any adhesive film, avoid prolonged exposure to high heat and ensure good ventilation during processing. If you’re using near children or in sensitive environments, refer to the product’s packaging for safety details and any standard compliance notes.

If you’re shopping around for finishes, you can view other DC Fix options on Fepy to compare gloss vs matte and different colors. For white gloss access here: https://fepy.com/product/dc-fix-plain-gloss-adhesive-sheet-white-45cm-x-15m and for matte grey here: https://fepy.com/product/dc-fix-plain-matte-adhesive-sheet-grey-45cm-x-15m. For additional variants like black gloss or patterned finishes, you can explore similar product pages on Fepy.