شريط تثبيت ديلي فوم (25.4Mm×1.5M) طول (1.5M) ثبات يملأ الفراغات، مثالي لتركيب أي شيء من لفة واحدة

Core specs: 1 mm foam thickness for gap filling on textured surfaces, 25.4 mm wide strip for a larger contact area, 1.5 m length, indoor-rated, and designed for a clean, hidden-fastener look on painted walls, glass, metal, and sealed plastics.

How to use: clean the surface, cut the tape to the desired length, remove the liner, and press the object firmly against the surface. Apply steady pressure for 30–60 seconds to activate the bond. Avoid repositioning after full adhesion if possible, and keep the surfaces free of dust and moisture during application.

Best on painted walls, glass, metal, and sealed plastics. It can fill minor gaps on textured surfaces. Avoid porous or dirty surfaces, and avoid outdoor or high-moisture environments where long-term exposure could weaken the bond.

Removal can sometimes leave some adhesive residue on sensitive surfaces. If that happens, gently peel at a shallow angle and clean with a mild solvent such as isopropyl alcohol. Test a small area first to minimize any surface impact.

The 1 mm foam provides a cushion that conforms to minor surface irregularities, which helps create a more secure bond on textured or uneven surfaces while maintaining a clean, hidden appearance.

- Deli Foam Mounting Tape (0.8 mm) with the same 25.4 mm width and 1.5 m length offers a thinner option with less gap filling, suitable for flatter surfaces. URL: https://fepy.com/product/deli-foam-mounting-tape-0-8mm-25-4mm-1-5m - Deli Foam Mounting Tape (1.0 mm) with 3 m length provides more material for longer runs or multiple placements. URL: https://fepy.com/product/deli-foam-mounting-tape-1mm-25-4mm-3m

Great for mounting posters, signs, classroom displays, retail fixtures, and lightweight wall-mounted items where a clean, hidden-fastener look is desired without nails, screws, or visible hardware.

The bond forms upon contact; pressing firmly helps it adhere well. Repositioning after initial contact may be possible before full bonding, but prolonged repositioning can weaken the eventual hold. For best results, aim for a final placement during the initial press.

Use indoors as designed. Avoid extreme heat and direct water exposure. It’s intended for lightweight, non-structural mounting; keep out of reach of children and pets, and inspect the bonded area periodically if used for displays or signage.

Value comes from the 1.5 m roll and its freedom from nails or screws. If you have multiple placements, look for bundles or multi-pack options on Fepy to maximize cost efficiency. The listed roll length supports several mounting tasks in one purchase.