قاطعة ورق ديلي جيلوتين مقاس (A3) بقاعدة خشبية (460×380mm) شبكة محاذاة مثالية لقص الورق في المكاتب والاستوديوهات لون بني

Bed size: 460×380 mm. Blade: steel for clean cuts. Alignment grid for repeatable alignment. Safety latch to lock the blade. Non-slip feet for stability. Lightweight and portable design for moving between rooms.

It's ideal for standard office papers and larger sheets such as posters and oversized prints up to the bed size. Great for classroom, studio, or office cutting tasks.

Place your paper against the grid lines, slide the stack until the edges align with the guide marks, and then press the blade straight down for each cut to maintain consistency across runs.

Always use the safety latch to lock the blade when not cutting, keep fingers away from the blade path, and cut on a stable, flat surface to prevent slips.

Position it on a flat, stable desk, ensure the non-slip feet are engaged, align your sheets with the grid before cutting, and operate the blade with a smooth, controlled motion.

Office document finishing, classroom poster or handout preparation, and design/studio projects that require straight, repeatable edges on medium to large sheets.

Yes. The cutter comes with a pre-assembled wood base. Simply place it on a stable surface, ensure the non-slip feet grip well, and use the safety latch to lock the blade when not cutting.

You can compare the E8002 with other Deli models such as E8001 and E8003, which offer different bed sizes and configurations to fit smaller or larger cutting needs. See E8001 at https://fepy.com/product/deli-guillotine-paper-cutter-e8001 and E8003 at https://fepy.com/product/deli-guillotine-paper-cutter-e8003 for details.

The box includes the Deli guillotine cutter E8002 with the wood base, the printed alignment grid on the bed, the safety latch, non-slip feet, and a user manual.

The blade is designed for clean cuts on stacks of paper. For best results, start with a small batch to test alignment, then increase the number of sheets gradually to achieve your desired throughput without jams.

Keep the blade dry and clean, store with the blade locked, and use the alignment grid to minimize blade wear from miscuts. If the blade becomes dull, follow manufacturer guidance for replacement.