شريط تثبيت ديلي، مزدوج الجوانب (1Mm×25.4Mm) طول (5M) ثبات يملأ الفراغات، مثالي لتركيب أي شيء لفة واحدة

Thickness: 1 mm; Width: 25.4 mm; Length: 5 m; Type: double-sided gap-filling foam mounting tape; Features: tool-free installation and a professional, hidden finish for clean presentations.

Steps: 1) Clean and dry the surface. 2) Cut the tape to the needed length. 3) Peel off the release liner from one side and apply to the item. 4) Peel the remaining liner and press the item firmly onto the smooth indoor surface. Press firmly for good contact; avoid repositioning after attachment.

Best on smooth indoor surfaces such as painted walls, metal, glass, laminated boards, or plastic displays. Avoid rough, dusty, or porous surfaces and prolonged outdoor exposure.

Compared with nails/screws, this tape offers a tool-free, hole-free mounting suitable for lightweight items and quick changes. For different lengths or slight adhesive variations, you can also explore other Deli mounting tapes on Fepy: 1) Deli mounting tape double-sided 1mm x 25.4mm x 3m — https://fepy.com/product/deli-mounting-tape-double-sided-1mm-25-4mm-3m 2) Deli mounting tape double-sided 1mm x 25.4mm x 2m — https://fepy.com/product/deli-mounting-tape-double-sided-1mm-25-4mm-2m

The foam conforms to minor surface irregularities, helping to maximize contact and creating a more secure, even bond across the mounted area. This is especially helpful when mounting slightly uneven posters or fixtures.

Use cases include mounting posters, signs, lightweight frames or panels, classroom displays, product information boards, and temporary fixtures where hardware-free changes are advantageous.

Use clean, sharp scissors or a utility knife to cut the tape to length. Handle the release liners carefully to avoid touching the adhesive surfaces. Keep the adhesive clean and dry until installation.

Yes, it is designed for indoor use on smooth surfaces typically found in offices, classrooms, and retail spaces. As with any adhesive, avoid prolonged exposure to heat sources and do not load items beyond what lightweight mounting allows.

To remove: warm the adhesive slightly with a hair dryer to soften it, then gently peel back at a shallow angle (about 45 degrees). If residue remains, wipe with a gentle solvent like isopropyl alcohol and a soft cloth. Always test on a small, inconspicuous area first.

Value comes from its long 5 m roll and its tool-free, low-mess installation for lightweight items. If it doesn’t meet your weight limits or surface conditions, assess other lengths offered by Deli on Fepy (e.g., 3 m or 2 m variants) to match your project needs. If you’re not satisfied, review Fepy’s standard return policy for options.