شفرة المنشار الدائري (DT1954-QZ) من (Dewalt) قطر (235mm) بسماكة (2.6mm) و بحجم تثبيت (30mm) و بزاوية أسنان (20DEG)

It's a 235 mm blade from DeWalt's Series 30 lineup, optimized for both rip and crosscuts. With a 20-degree Alternate Top Bevel (ATB) tooth geometry and a 1.7 mm plate thickness, along with a 2.6 mm kerf, it delivers a smooth finish and good stability across hardwoods, laminates, veneers, and composites.

Diameter: 235 mm; Plate thickness: 1.7 mm; Kerf: 2.6 mm; Tooth geometry: ATB with a 20° angle; Material: high-speed steel tooth set designed for durable, accurate cuts in a variety of materials.

Hardwoods, laminates, veneers, and composites. The Series 30 ATB design helps achieve clean cuts in both softer and harder engineered materials, making it versatile for woodworking and cabinetry tasks.

The 20° Alternate Top Bevel creates a sharper edge on each tooth, promoting smoother cuts with reduced chipping and a cleaner finish on finished surfaces, especially when crosscutting and trimming sheet goods.

Yes. The 235 mm diameter makes it suitable for many direct-drive multi-cutter circular saws, enabling quick blade swaps to adapt to different cutting tasks.

1) Ensure the saw is unplugged or the battery is removed. 2) Open the blade guard and remove the old blade. 3) Align the blade’s rotation arrow with the saw’s direction. 4) Place the blade on the arbor and secure it with the arbor nut, tightening firmly but not over-tightening. 5) Close the guard and perform a test cut on scrap material to verify tracking and rotation.

Wear eye and hearing protection, use a dust mask or respirator when cutting, securely clamp workpieces, keep hands away from the blade, allow the blade to reach full speed before feeding material, and keep the work area clean to prevent kickback or binding.

Cabinetry and furniture making, flooring installations, trimming laminated panels, cutting plywood or veneer sheets, and any project requiring clean crosscuts and rip cuts on engineered wood and hardwoods.

In the Series 30 lineup, blades differ mainly in tooth count, tooth geometry, and bevel angle. DT1954-QZ emphasizes a balance of fast cutting and smooth finishes with ATB 20° teeth, making it well-suited for mixed-material cutting. Other Series 30 blades may prioritize faster material removal or finer finishes depending on their tooth design and bevel angle.

• DeWalt DT1955-QZ Circular Saw Blade Series 30 235mm: https://fepy.com/product/dewalt-dt1955-qz-circular-saw-blades-series-30-235mm • DeWalt DT1960-QZ Circular Saw Blade Series 30 235mm: https://fepy.com/product/dewalt-dt1960-qz-circular-saw-blades-series-30-235mm • DeWalt category page for Series 30 235mm blades: https://fepy.com/category/dewalt-series-30-blades-235mm

The blade uses high-speed steel and a robust 1.7 mm plate to balance durability with cutting performance. The number of re-sharpenings depends on material hardness and cutting conditions, but blades with this design are designed for multiple resharpenings when professionally maintained.

Look for the correct diameter (235 mm) to match your saw, the appropriate kerf (2.6 mm) for your setup, and the bevel geometry (20° ATB) that suits your expected mix of ripping and crosscutting tasks. Also verify compatibility with your saw’s arbor and drive system and ensure the blade material and construction match your work materials for best results.