منشار البلاط الدائري (DWC410-QS) من ديوالت قياس (110mm) للأعمال الرطبة

The Dewalt 110mm Hand-Held Wet Circular Tile Saw is a portable wet-cutting tool that uses a 110mm blade powered by an 1100W motor to slice through tiles. When connected to a water source, water cools the blade to reduce heat and dust, helping maintain blade life and delivering cleaner cuts. You guide the saw along the tile using the adjustable footplate and the Quick-Lock Rip Guide for straight cuts up to about 40 cm.

Key specs: 1100W motor, up to 3500 RPM cutting speed, 110mm blade diameter, adjustable footplate enabling cuts up to 59mm in depth, Quick-Lock Rip Guide for rip cuts up to 40 cm, compatible with a standard garden hose water supply for continuous wet cutting, and capable of cutting tiles up to 33 mm thick.

1) Unplug the tool. 2) Attach a water supply to the water connector to provide continuous wetting. 3) Install a compatible 110mm wet tile blade. 4) Set the adjustable footplate to the desired depth and secure the Quick-Lock Rip Guide for your cut length. 5) Align the tile and start the saw, feeding the blade steadily along the mark. 6) After completing the cut, switch off, unplug, and clean the area before storing.

The Quick-Lock Rip Guide is a locking guide that lets you make straight, repeatable rip cuts. It provides a stable fence to guide the tile along the blade, helping achieve precise, consistent cuts up to 40 cm in length without drift.

Always wear eye protection, hearing protection, and gloves. Use stable footing and keep hands away from the blade. Ensure the water supply is connected to minimize dust and to cool the blade. Use the built-in overload protection switch (as described in the product) to prevent motor over-stress and power the tool off when not in use.

Regularly inspect the blade for wear or damage and replace it with a compatible 110mm wet-tile blade when needed. To replace: unplug the tool, remove the blade guard if applicable, loosen the blade bolt with the appropriate wrench, swap in a new 110mm wet tile blade, reseat the guard, and test for smooth operation before resuming work. Clean the watering connections and dry the tool after use.

It’s well-suited for cutting ceramic and porcelain tiles for bathroom and kitchen installations, backsplashes, small to mid-size tile projects, and countertop edge cuts where a precise, clean wet cut is preferred to reduce chipping and dust.

The 110mm model offers a compact, lighter form factor with a similar wet-cutting capability and rip-guide system. The 115mm variant typically provides a larger blade surface for potentially faster cuts on bigger tiles. For a direct comparison, see the Dewalt 115mm option here: https://fepy.com/product/dewalt-115mm-wet-tile-saw

Both are compact, 110mm options designed for precise wet cuts. The Makita alternative may differ in motor torque, blade design, or ergonomic features. See Makita’s 110mm wet tile saw here: https://fepy.com/product/makita-110mm-wet-tile-saw

The Bosch 110mm option is another compact, water-cooled tile saw with similar capabilities. Differences may include build quality, ergonomics, and blade compatibility. Compare it here: https://fepy.com/product/bosch-110mm-wet-tile-saw

The Ryobi 110mm model offers a budget-friendly alternative with similar wet-cut capabilities. It’s useful to compare price, running cost, and blade availability with Ryobi’s option here: https://fepy.com/product/ryobi-110mm-wet-tile-cutter

If you’re cutting ceramic or porcelain tiles and want clean, precise cuts with reliable wet-cutting performance, the Dewalt 110mm model delivers strong core features: 1100W motor, 3500 RPM, 59mm cut depth, 40 cm rip-guide capacity, and garden-hose water feeding. When deciding, compare its power, cut depth, and guide capabilities against similar 110mm and 115mm options available on Fepy to ensure you’re getting the best value for your project needs.