Question 1

What is the Dewalt 100mm 800W Angle Grinder Toggle Switch and what is it used for?

Accepted Answer

It's a compact, sturdy 100mm angle grinder powered by an 800W motor designed for cutting, grinding, sanding, and polishing tasks. The tool features a 3-position toggle switch with a lock-on trigger for safer, continuous operation and an ergonomic design for comfortable use in tight spaces.

Question 2

What are the main specifications I should know about this grinder?

Accepted Answer

Key specs include an 800W motor, a 100mm disc diameter, a 3-position toggle switch with lock-on, and an all-metal construction for durability. The design emphasizes a balance of power, control, and long-term reliability in a compact form.

Question 3

How does the 3-position toggle switch with lock-on improve safety and control?

Accepted Answer

The 3-position toggle switch allows quick on/off control with a lock-on feature for extended operations, reducing finger fatigue during continuous grinding or cutting. This setup helps you maintain steady control and safely manage longer tasks without holding the trigger the entire time.

Question 4

What discs and guards are compatible with this grinder?

Accepted Answer

This grinder uses standard 100mm discs and standard mounting interfaces. Ensure you use compatible guards and discs with a suitable arbor (commonly 5/8-11 threaded discs for 100mm grinders) and always follow the manufacturer’s guidelines for disc type and safety guards.

Question 5

What are typical use cases for this 100mm, 800W grinder?

Accepted Answer

Ideal for metal fabrication, construction, automotive work, and home improvement projects. It’s well-suited for cutting small sections, grinding welds, rust removal, deburring, and polishing surfaces in tight or awkward spaces.

Question 6

How do I install and start using the grinder safely?

Accepted Answer

Steps: unplug the tool, attach a compatible 100mm disc and the appropriate guard, ensure the tool is switched off, connect to power, and then use the lock-on switch for extended operations. Hold the grinder with both hands, keep the guard in place, apply steady, light pressure, and let the wheel do the work without forcing it.

Question 7

What safety gear should I wear when using this grinder?

Accepted Answer

Always wear safety glasses or a face shield, hearing protection, and a dust mask or respirator as appropriate. Use gloves to protect your hands, snug clothing to avoid entanglement, and ensure a properly fitted guard is in place to shield against sparks and debris.

Question 8

How should I maintain this grinder to keep it performing well?

Accepted Answer

Regularly inspect the power cord for damage, keep vents clear of dust, and clean the tool after use. Check the guard, switch, and discs for wear or damage, and replace worn parts promptly. Store in a dry place to prevent corrosion of metal parts.

Question 9

Is this Dewalt grinder good value compared with other 100mm grinders on Fepy?

Accepted Answer

Yes, given its robust all-metal construction, 800W power, and safety-focused toggle switch with lock-on, it offers strong performance for its size. For alternatives, you can compare it with other 100mm grinders available on Fepy, such as the DeWalt 100mm 800W model (DWE4001-B5) and similar 100mm options on the platform: https://fepy.com/product/dewalt-dwe4001-b5-100mm-angle-grinder-800w and https://fepy.com/product/bosch-gws-8-100-800w-angle-grinder

Question 10

What are common issues to watch for and quick troubleshooting tips?

Accepted Answer

If the grinder won’t start, check the power supply, ensure the switch and wiring are intact, and verify the disc is correctly installed and not jammed. If it overheats, turn it off and allow it to cool before using again, inspect the vents for obstructions, and ensure you’re not applying excessive pressure. Replace worn discs or damaged guards promptly.

Question 11

What makes this grinder stand out compared to other 100mm options on Fepy?

Accepted Answer

Its combination of an 800W motor, compact ergonomic design, and a 3-position toggle with lock-on provides strong performance with safer, easier operation in tight spaces. When comparing, look at motor power, build quality, safety features, and included accessories to assess overall value against other 100mm grinders listed on Fepy.

Question 12

Are there any installation pitfalls to avoid with this model?

Accepted Answer

Avoid using damaged discs, ensure the guard is correctly aligned with the disc direction, and never mount a disc that exceeds the tool’s stated capacity. Always secure the tool before plug-in and test the switch operation at a safe distance from any workpiece to prevent kickback or wheel snag.

الجلاخة الزاوية (DWE4001-B5) من ديوالت باستطاعة (800W) و قياس (100mm)

Features & Benefits

Specification

Attachments

Frequently Asked Questions