الجلاخة الزاوية (DWE492-B5) من ديوالت قياس (230mm) استطاعة (2200W) بمفتاح قفل و تشغيل

This high-power grinder is ideal for heavy metal cutting, grinding, rust removal, and surface prepping. With a 230mm disc and a 2200W motor capable of up to 11,000 RPM, it handles demanding metalworking tasks efficiently. The Lock-On switch helps you run the tool continuously for extended work, while the spindle lock enables quick disc changes.

Key specs include: 230mm disc size, 2200W input power, no-load speed up to 11,000 RPM, spindle lock for quick disc changes, lock-on switch for extended use, two-position auxiliary handle, adjustable guard, and a durable hard-plastic housing with a rubber-lined grip.

The spindle lock lets you immobilize the spindle so you can safely swap discs quickly, while the lock-on switch allows you to run the grinder continuously without keeping the trigger pressed, reducing fatigue on long tasks.

Steps: 1) Unplug the tool. 2) Engage the spindle lock. 3) Use the provided spanner/wrench to loosen the wheel nut. 4) Remove the current disc and align a 230mm wheel. 5) Place the new disc and secure with the nut. 6) Reattach and check the guard. 7) Before heavy use, test at no-load with the guard in place.

Use the two-position auxiliary side handle to position the grip for your cutting direction. Adjust the guard to fully shield your body and avoid exposure to the disc. Ensure a secure grip with the rubber-lined handle to reduce vibration during use.

Always wear safety glasses or a face shield, hearing protection, and work gloves. Use a dust mask or respirator if cutting or grinding materials that generate fine dust, and wear appropriate clothing and sturdy footwear.

Best for heavy metal cutting and grinding, rust removal, weld preparation, and surface finishing on steel and other metals. The 230mm disc size enables broader material removal in a single pass, improving productivity on large jobs.

Keep vents and cooling areas clear of dust, inspect the disc and guard before use, check the power cord for damage, and store in a dry place. Clean the exterior with a dry cloth after use and periodically inspect moving parts for wear. Replace damaged components promptly.

Consider compatible 230mm grinding discs (metal grinding and cutting discs), spare guards, a spare flange and nuts set, a spanner wrench for disc changes, an auxiliary handle, and a high-quality replacement power cord if needed.

Makita’s 230mm grinder on Fepy offers similar power and disc size with its own ergonomic design and features. For a side-by-side look, compare specs like motor power, RPM range, and included safety features on the Makita listing: https://fepy.com/product/makita-230mm-angle-grinder-2000w

Bosch options in the same category provide comparable performance with model-specific safety features and ergonomics. See Bosch’s 230mm grinder listing for direct comparison: https://fepy.com/product/bosch-230mm-angle-grinder-2000w

Evolution’s 230mm grinders offer rugged construction and different balance/ergonomics. For a direct comparison, check Evolution’s listing: https://fepy.com/product/evolution-230mm-angle-grinder-2000w

Avoid using the wrong disc type for the task, applying side pressure that can kick back, removing or disabling the guard, and running the tool at full speed without a disc for testing. Always unplug before any disc change, and ensure proper disc alignment and guard coverage before use.