أداة (ريشة) مثقب ديوالت نوع (SDS+) قياس (50mmX110mm) قطر (10mm)

Diameter: 10 mm; Working length: 50 mm; Overall length: 110 mm; SDS+ shank; carbide tips; oxide coating; W-fluted for better debris clearance; finished with a black nitride coating for rust resistance.

The bit uses an SDS+ shank that fits SDS+ hammer drills. Ensure your drill is an SDS+ model, insert the bit into the chuck, and lock it in place to allow rapid in-and-out bit changes during heavy-duty masonry drilling.

It’s designed for concrete, bricks, mortar, and other masonry surfaces, delivering efficient cutting and long bit life in these materials.

Use a hammer drill in SDS+ mode at low to medium speed. Apply steady, light pressure and let the bit cut. Periodically withdraw the bit to clear debris and prevent overheating for optimal performance.

Remove the current bit, insert the 10 mm SDS+ bit into the SDS+ chuck until fully seated, and ensure the quick-change mechanism locks. Twist slightly to verify it’s secure before drilling.

Wear eye protection, hearing protection, and gloves. Secure the workpiece, use a dust mask when cutting masonry, and avoid loose clothing. Ensure the drill is off before changing bits.

Carbide tips provide wear resistance, the oxide coating extends bit life, the dual-cutting-edge design reduces wear, and the black nitride finish adds rust protection for heavy-duty use.

Both are SDS+ masonry bits with carbide tips and similar overall dimensions. The Bosch option may differ in tip geometry and coating; overall drilling performance is comparable. See the Bosch variant here: https://fepy.com/product/bosch-sds-plus-drill-bit-10mm-50mm-110mm

Makita’s SDS+ bit of the same size typically offers comparable performance with its own tip geometry and coating. It’s worth comparing price and availability. See the Makita variant here: https://fepy.com/product/makita-sds-plus-drill-bit-10mm-50mm-110mm

Drilling anchor holes for masonry fasteners, installing electrical boxes or conduit in concrete walls or floors, drilling through masonry for plumbing or wiring routes, and retrofitting concrete or brick structures.

Consider the required hole diameter, hole depth, and the material you’re drilling. Check compatibility with your drill (SDS+), look at carbide tip quality, coating for rust resistance, overall length for reach, and price. If you need a closer match, compare with other brands like Makita or Bosch using the links provided.