أداة (ريشة) مثقب ديوالت نوع (SDS+) قياس (100mmX160mm) قطر (14mm)

Specifications: diameter 14 mm, flute length 100 mm, overall length 160 mm, SDS+ shank compatible with SDS+ drills, diamond-ground tip, carbide head, designed for concrete and stone drilling with efficient debris ejection.

Yes, this bit is designed for SDS+ drills. Ensure your drill has an SDS+ chuck and use appropriate hammer/rotation settings to match the material you’re drilling into.

Common use cases include deep holes for ground anchors, dowel holes, and masonry drilling in concrete or stone where sturdy, precise holes are required.

Insert the bit into the SDS+ chuck, set the drill to hammer mode with steady, moderate pressure, and maintain a perpendicular angle to the work surface. Use a consistent speed and allow the bit to cut rather than forcing the drill. Periodically remove debris to maintain cutting efficiency.

Wear safety glasses, hearing protection, and a dust mask if needed. Secure the workpiece, keep hands away from the drill path, and avoid overheating the bit by drilling in short, controlled passes and letting the bit cool between heavy cuts.

When choosing between brands, compare tip design, material quality, and flute geometry. For equivalent 14 mm SDS+ bits, you can also consider these on Fepy: Bosch SDS+ Drill Bit 14mm x 100mm x 160mm: https://fepy.com/product/bosch-sds-plus-drill-bit-14mm-100mm-160mm and Makita SDS+ Drill Bit 14mm x 100mm x 160mm: https://fepy.com/product/makita-sds-plus-drill-bit-14mm-100mm-160mm. Look for diamond-ground tips, carbide heads, and flute length to gauge performance and wear life.

Keep the bit clean after use to remove dust and debris, avoid excessive heat by drilling in short, controlled passes, and store it in a dry, protective case. Inspect the carbide head and flute for wear before reuse.

Use with an SDS+ hammer drill in hammer mode. For deep holes, consider a depth stop or guide if your setup supports it to ensure consistent depth. Match the drill speed and hammer action to the material to optimize cutting efficiency and reduce wear.

Consider the combination of tip design (diamond-ground), carbide head durability, flute geometry for debris removal, overall length for deep holes, and brand reputation. Higher upfront cost can translate to longer life and faster, cleaner drilling in tough materials.

Fepy offers a range of SDS+ bits in various diameters and lengths. For similar options, explore the Dewalt SDS+ line in different sizes or view other brands like Bosch or Makita in their SDS+ drilling bit categories on Fepy. Example pages include: Dewalt variant: https://fepy.com/product/dewalt-sds-plus-drill-bit-14mm-x-100mm-x-160mm, and alternative brand options such as Bosch: https://fepy.com/product/bosch-sds-plus-drill-bit-14mm-100mm-160mm and Makita: https://fepy.com/product/makita-sds-plus-drill-bit-14mm-100mm-160mm.