أداة (ريشة) مثقاب ديوالت نوع (SDS+) قياس (100mm X 160mm) قطر (16mm)

Diameter: 16 mm. Shank: SDS+ compatible. Working length: 160 mm. Overall length: about 247 mm. Tip: carbide for durability and faster drilling. Flute geometry is optimized for dust extraction with two spiral flutes for efficient material removal. Shank has three flats for secure retention in the chuck.

Yes. The SDS+ shank is designed to fit SDS+ chucks found on compatible DeWalt SDS+ cordless drills. Always verify your tool accepts SDS+ bits before use and insert the bit fully and securely.

This bit is intended for masonry and concrete. It’s optimized for drilling into brick, block, concrete and similar masonry materials. Not recommended for metal or soft plastics.

1) Ensure the drill is off and the battery is removed. 2) Insert the SDS+ bit into the drill’s chuck until it seats with a positive engage. 3) Set an appropriate drilling speed for masonry (moderate RPM, steady feed). 4) Start drilling with steady pressure and allow the bit to cut; avoid forcing the bit or overheating. 5) Use dust extraction if available and clean the bit after use.

Use the correct drill speed and a steady feed rate to minimize heat buildup. Keep the bit clean of dust, use dust extraction if possible, and avoid jamming or piercing through hard obstacles. Store the bit in a dry place to prevent corrosion.

Wear eye protection, hearing protection if using with a loud drill, and a dust mask or respirator when drilling masonry. Secure the workpiece with clamps, keep hands away from the drill bit, and follow the drill manufacturer’s safety guidelines for SDS+ use.

If you’re evaluating options, you can explore other 16 mm SDS+ bits on Fepy to compare carbide tip quality, flute design, and depth capabilities. For quick options, visit the related product listings via these search results: https://fepy.com/search?q=dewalt+sds+plus+drill+bit+16mm and https://fepy.com/search?q=bosch+sds+plus+drill+bit+16mm

Great for installing conduits, electrical boxes, wall anchors, or drilling into concrete or brick behind walls where masonry is present. The 160 mm working length helps reach slightly deeper masonry sections without needing a longer bit.

Carbide-tipped, hardened-steel construction combined with DeWalt’s build quality typically offers reliable performance and longer life in masonry drilling. When evaluating value, weigh bit durability, compatibility with your tool, and the required drilling depth against other brands and lengths in the same 16 mm SDS+ category on Fepy.

You can compare broader options by browsing related pages or performing focused searches on Fepy’s site, such as https://fepy.com/search?q=sds%2Bplus%2Bdrill%2Bbit%2B16mm and https://fepy.com/search?q=dewalt+sds+plus+drill+bit+16mm to see other 16 mm SDS+ bits available.