أداة (ريشة) مثقاب ديوالت نوع (SDS+) قياس (150mmX200mm) قطر (16mm)

Diameter: 16mm; flute length: 150mm; overall length: 200mm; shank: SDS+ compatible; construction: high-grade steel with brazed tips; design: 4-flute for efficient drilling.

It is suitable for drilling into concrete, block, stone and other dense masonry materials when used with an SDS+ hammer drill.

Insert the bit fully into the SDS+ chuck so the shank is secure. Set your drill to hammer mode and start at a low speed to create a pilot hole if needed. Apply steady, moderate pressure and let the bit do the work. Occasionally withdraw the bit to clear dust and debris.

The 4-flute design enhances fast material removal and reduces bit binding in masonry substrates. Brazed tips improve tip durability and provide precise, reliable hole drilling, extending the bit’s life under heavy use.

Wear eye protection and gloves, ensure the drill is powered off when changing bits, secure the workpiece, and avoid overheating by drilling in short bursts with dust cleared between passes. Use the correct SDS+ chuck and keep the bit and drill dry and clean.

Ideal for creating holes for masonry anchors, installing electrical or plumbing runs, and any application requiring 16mm-diameter holes in concrete, brick or stone.

Keep the bit clean and dry after use, remove dust and debris, store in a dry place to prevent corrosion, and avoid dropping or striking the bit against hard surfaces which could damage the brazed tip.

On Fepy.com you can view similar 16mm SDS+ bits and compare features such as flute count, tip construction, and overall length. See the selection here: https://fepy.com/search?q=16mm+sds%2B+drill+bit

Yes, it is designed for SDS+ chucks and should work with most SDS+ hammer drills. Ensure your drill supports SDS+ shanks and is appropriate for masonry drilling.

For reinforced concrete, keep bit rotation steady, avoid excessive pressure, and deburr or clear bits to reduce binding. When drilling through tile or ceramic, consider starting with a carbide-tipped or diamond-encrusted bit designed for tile and switch to this SDS+ bit for masonry once you break through.

This bit combines a brazed tip with a robust 4-flute design, offering reliable performance and longer life under heavy use. While other options may be cheaper, the durability and consistent drilling performance of this Dewalt bit can provide better long-term value by reducing bit changes and improving hole quality.