أداة (لقمة) مثقاب (Dewalt) نوع (SDS+) قياس (25MMX200MMX250MM)

Key specs: 25mm diameter, 200mm tip length, 250mm overall length, chrome vanadium steel body, hardened and tempered for durability, wave-design for faster drilling, patented tip to minimize bit walking, compatible with SDS+ and SDSmax hammer drills, and included hinged carrying case.

It's optimized for masonry and concrete drilling, so you can use it on concrete walls, floors, brick, and other masonry substrates. It’s not designed for metal or soft plastics.

Ensure your drill is SDS+ or SDSmax. Insert the bit securely into the chuck, seat it fully, and select the hammer function. Start at a low speed to seat the bit, then increase speed and apply steady, moderate pressure. Drill in short bursts to avoid overheating and clear dust as you go. For long holes or overhead work, support the workpiece and maintain perpendicular alignment for best results.

Wear eye protection, hearing protection, and a dust mask. Secure and support the workpiece, keep hands clear of the rotating bit, and avoid forcing the bit. Use two hands on the drill for control, work in a well-ventilated area, and inspect the bit for wear before use.

Keep the bit clean and free of masonry dust, avoid overheating by using short drilling bursts, store it in the provided carrying case, and inspect for wear or dullness before each use. If the tip shows significant wear, replace to maintain performance.

Compared with other SDS+ bits on Fepy, this model offers a longer 250mm shoulder for deep holes and a patented tip with a wave design for reduced wandering and faster drilling. It combines premium chrome vanadium steel with a robust carrying case. For reference, similar alternatives on Fepy include Dewalt 25mm variants with different lengths, Bosch 25mm SDS+ bits, and Makita SDS+ options—examples of available listings can be found at https://fepy.com/dewalt-sds-plus-drill-bit-25mm-200mm-320mm, https://fepy.com/bosch-sds-plus-drill-bit-25mm-200mm-300mm, and https://fepy.com/makita-sds-plus-drill-bit-25mm-210mm-310mm respectively.

Choose this longer 250mm bit when you need deep holes or work in tight spaces where reach matters, such as anchoring through thick concrete sections or drilling from overhead. It provides stability with a longer shoulder to help control wandering, though it may be heavier and slightly slower in very shallow holes.

Ideal for masonry drilling in concrete walls and floors, drilling for conduit or anchor placements, and installations requiring deep holes. It’s well-suited for construction, renovation, and industrial applications where long reach and precision are important.

Yes, this bit is designed to be compatible with SDS+ and SDSmax hammer drills. It is packaged with a hinged-style carrying case for easy storage and transport.

If you’re not satisfied, you can initiate a return per Fepy’s standard return policy. Be sure to verify any time limits and condition requirements on the Fepy site for returns.

Yes, for frequent masonry drilling, the Dewalt 25mm x 200mm x 250mm bit offers durability, a deep reach, and reduced wandering, which lowers downtime and replacement costs over time. The included carrying case adds convenience and protects the bit during storage and transport, contributing to overall value.