أداة (ريشة) مثقب ديوالت نوع (SDS+) قياس (150mmX210mm) قطر (6mm)

Specifications include: 6 mm diameter; overall length 210 mm; working length 150 mm; SDS+ shank for quick-change compatibility; heat-treated carbon steel construction for durability; four-fluted helix geometry for efficient chip removal; precision ground cross-cut tip for accurate drilling.

An SDS+ shank is a quick-change, self-centering connection used with hammer drills. It allows for fast bit insertion and secure locking, reduces bit wobble, and supports aggressive drilling in masonry and concrete without needing a keyed chuck.

1) Ensure your drill supports SDS+ bits and is set to hammer mode if drilling masonry. 2) Insert the bit into the SDS+ chuck until it locks in place. 3) Start at a low speed to establish a groove, then switch to appropriate drilling speed. 4) Apply steady, moderate pressure without forcing the bit. 5) Withdraw periodically to clear chips and prevent obstruction. 6) Use dust extraction if possible to keep the work area clean.

Use the hammer function on masonry material, start slowly to seat the bit, and maintain steady pressure without pushing aggressively. Let the bit do the cutting, and drill in short bursts to manage heat. Periodically withdraw the bit to clear chips and allow cooling when drilling deeper holes.

Wear safety glasses to protect eyes from flying debris, hearing protection if using a loud hammer drill, and a dust mask or respirator if dust is present. Secure the workpiece, wear appropriate gloves, and use dust extraction or a vacuum to minimize airborne particles. Avoid loose clothing or jewelry that could get caught in the drill.

Yes. This SDS+ drill bit is compatible with both corded and cordless drills that support SDS+ bits. Ensure your drill is set to the correct mode (hammer/rotary hammer) for masonry drilling and that the chuck can accept SDS+ shanks.

This Dewalt bit emphasizes durability and fast drilling through heat-treated carbon steel with a four-fluted geometry and a precision ground tip. Dewalt’s design typically aims for longer life and reliable performance in tough materials. For reference, similar 6mm SDS+ options on Fepy include Bosch, Makita, and Milwaukee variants, which you can view on their product pages: https://fepy.com/product/bosch-sds-plus-drill-bit-6mm-150mm-210mm, https://fepy.com/product/makita-sds-plus-drill-bit-6mm-150mm-210mm, https://fepy.com/product/milwaukee-sds-plus-drill-bit-6mm-150mm-210mm.

Ideal for drilling anchor holes and fasteners into concrete walls, masonry partitions, and stone surfaces. It’s well-suited for installing electrical boxes, wiring conduits, plumbing fixtures, or any project requiring precise holes in masonry materials where a reliable, durable bit is beneficial.

Yes, Fepy typically carries other sizes in the SDS+ family. If you need a different diameter or length, you can explore additional SDS+ bits in the same category to find the right match for your drill and project.

This Dewalt bit emphasizes long-term durability and efficient performance on tough masonry materials. If you frequently drill into concrete or stone, the improved life from heat-treated steel and optimized geometry can offer better value over time due to fewer replacements and consistent results.

Keep the bit clean after use, wipe away dust and debris, and store it in a dry place to prevent corrosion. Inspect the tip for wear before each use and avoid applying excessive pressure that can dull the tip or overheat the bit. Regularly using proper drilling speeds and intermittent drilling bursts helps preserve performance and longevity.