أداة (ريشة) مثقب ديوالت نوع (SDS+) قياس (50mmX110mm) قطر (6mm)

Best suited for concrete, masonry, brick, and similar hard construction materials. It’s not intended for drilling metals or soft woods.

Diameter: 6 mm. Working length: 50 mm. Overall length: 110 mm. Shank: SDS+ (spring-loaded 6 mm shank) for use with compatible rotary hammer drills.

Insert the bit into the SDS+ chuck of your rotary hammer drill until seated securely. Engage the hammer mode, set an appropriate speed/torque, and drill with steady, controlled pressure. Lift the bit occasionally to clear debris and avoid overheating.

It features a carbide tip for fast drilling and long life, a reinforced head, a dust flap, and a variable flute design to improve dust extraction and penetration. The spring-loaded 6 mm shank helps reduce vibration for smoother operation.

Yes, it’s designed for SDS+ rotary hammer drills with a 6 mm SDS+ shank. Ensure your drill supports SDS+ bits and use the correct chuck and settings for concrete or masonry drilling.

Use at appropriate speeds and avoid excessive lateral pressure. Drill in short bursts to manage heat, keep the bit clean of dust after use, and store in a dry place to prevent corrosion. Avoid forcing the drill through material; if progress slows, back off and clear debris.

Wear eye protection, hearing protection, gloves, and a dust mask as needed. Secure the workpiece, keep hands away from the rotating bit, and ensure the drill is powered off before inserting or removing the bit. Use proper PPE and follow tool manufacturer guidelines.

Two solid alternatives on Fepy are: Bosch SDS Plus Drill Bit 6mm 50x110mm (https://www.fepy.com/product/bosch-sds-plus-drill-bit-6mm-50mm-110mm) and Makita SDS Plus Drill Bit 6mm 50x110mm (https://www.fepy.com/product/makita-sds-plus-drill-bit-6mm-50mm-110mm). Bosch often emphasizes efficient cutting and dust management, while Makita focuses on durability and smooth operation; each brand offers similar 6x50x110 mm options to compare with the Dewalt based on tip geometry and coating.

Drilling holes for concrete anchors, conduits, wiring, electrical boxes, or other masonry installations. It’s well-suited for retrofit or new construction tasks that involve concrete and masonry surfaces.

If you’re not satisfied, you can initiate a return per Fepy’s standard return terms for unused items in original packaging within the allowed window. Check your order details for the exact timeframe and steps to return.

Yes. The Dewalt SDS+ 6mm x 50mm x 110mm bit combines a carbide tip, reinforced head, and dust-extraction features with an SDS+ shank for smooth operation and long life. If you drill frequently into concrete or masonry, the durability and performance can offer better long-term value compared to budget bits.