أداة (ريشة) مثقب ديوالت نوع (SDS+) قياس (150mmX210mm) قطر (8mm)

This is a high‑performance 8mm SDS+ masonry drill bit designed for use with Dewalt SDS+ hammer drills. It features a length combination of 150mm (working length) and 210mm (overall length) to help you drill clean holes in masonry such as brick and concrete with fast, precise results.

Diameter: 8mm; Working length: 150mm; Overall length: 210mm. It is an SDS+ masonry drill bit compatible with Dewalt SDS+ drills and suitable for drilling into concrete, brick, and masonry.

Best suited for masonry materials such as concrete, brick, and other masonry substrates. It is designed to efficiently penetrate hard building materials commonly found in walls and floors.

Yes. The bit is designed to be compatible with Dewalt SDS+ drills. Make sure your drill is in SDS+ hammer mode when using it for masonry drilling.

1) Set your drill to SDS+ hammer mode. 2) Insert the bit firmly into the chuck until seated. 3) Start drilling at a low speed with steady, controlled pressure. 4) Keep the drill perpendicular to the surface. 5) Periodically pull the bit out to clear debris and prevent sticking. 6) Avoid excessive pressure and overheating for longer bit life.

Keep the bit clean and dry after use, wipe away dust and debris, and store in a protective case or pouch to prevent damage. Inspect the cutting edges for wear and replace when you notice significant dulling or misshapen cutting faces.

Wear eye protection (safety glasses), a dust mask or respirator when drilling dusty masonry, hearing protection if using a loud hammer drill, and work gloves to protect your hands from sharp edges and vibration.

The 6mm variant is better for smaller anchor holes and lighter-duty masonry tasks, while the 10mm variant is suitable for larger anchors and thicker or tougher masonry. The 8mm option strikes a balance between hole size and drilling speed, making it a versatile choice for many standard masonry applications.

Perfect for drilling holes in brick or concrete walls to install anchors for shelves, electrical or plumbing conduits, and mounting brackets. It’s well suited for medium-diameter fastening holes where a strong, clean bore is needed.

If you’re considering other sizes or brands on Fepy.com, you might look at: - Dewalt SDS+ Drill Bit 6mm-150mm-210mm: https://fepy.com/product/dewalt-sds-plus-drill-bit-6mm-150mm-210mm - Dewalt SDS+ Drill Bit 10mm-150mm-210mm: https://fepy.com/product/dewalt-sds-plus-drill-bit-10mm-150mm-210mm - Bosch SDS+ Drill Bit 8mm-150mm-210mm: https://fepy.com/product/bosch-sds-plus-drill-bit-8mm-150mm-210mm

Use the 150mm working length if your drill depth is shallow or you’re drilling through thinner material, which helps reduce bit wandering and heat buildup. Choose the 210mm overall length when you need a longer reach to drill through thicker walls or deeper anchors, ensuring you can complete the bore without repositioning.