منشار البلاط للعمل الرطب من ديوالت موديل (D24000S-QS) استطاعة (1600W) يعمل بكهرباء (220V)

Core specs include: 1600W motor powered by 220V, 24-inch rip capacity, 13-inch diagonal capacity, maximum cutting depth of 3-5/32 inches, 10-inch wet-cut diamond-coated blade, adjustable rip fence with miter gauge (0–45 degrees), removable cutting table, and a reinforced steel stand with heavy-duty rubber feet for stability.

The sliding rail system provides guided, straight cuts with minimal deflection, enabling precise repeatable cuts up to 24 inches. It helps maintain square edges and reduces stray or wobbling cuts during long tile runs.

The package includes the 10-inch wet cut diamond-coated blade, a pusher/sled for feed control, a water pump for blade cooling, a wrench for blade changes, and a reinforced steel stand for stability and hands-free operation.

Unpack and place the stable stand on a flat surface. Attach the saw to the stand using the provided hardware, connect the water pump to the water reservoir, install the 10-inch blade, feed the tile securely, and power the unit from a 220V supply. Use the adjustable rip fence for straight cuts and the miter gauge for angled cuts from 0 to 45 degrees.

Yes. The included diamond-coated blade is designed for wet cutting of porcelain, ceramic, and stone tiles. For particularly dense or thick tiles, ensure proper blade cooling, use the correct feed rate, and replace the blade when wear becomes evident.

The saw runs on 220V. In regions with 220V mains, you can plug it into a dedicated circuit as required. If your location uses a different voltage, you may need an appropriate transformer or converter, and you should verify local electrical codes before operation.

Rinse and drain the water trough to prevent mineral buildup, inspect the blade for wear and replace when necessary, clean dust and debris from the sliding rail, and ensure the stand feet remain stable. Store in a dry area to prevent rust on metal components.

For a similar 220V wet tile saw, you can compare with these models on Fepy: Dewalt 1800W 220V Wet Tile Saw With Stand (higher power) – https://fepy.com/product/dewalt-1800w-220v-wet-tile-saw-with-stand; Bosch 1700W 220V Wet Tile Saw With Stand (alternate brand) – https://fepy.com/product/bosch-1700w-220v-wet-tile-saw-with-stand; Makita 1600W 220V Wet Tile Saw (competitive option) – https://fepy.com/product/makita-1600w-220v-wet-tile-saw. These help you gauge power, cut capacity, and price against the Dewalt model.

Projects like kitchen backsplashes, bathroom tiling, shower niches, countertop edging, and large-format tile installations benefit from the saw's 24-inch rip capacity, reliable cut quality, and the convenience of the included stand for extended use.

The saw comes with a reinforced steel stand designed for stable, hands-free operation. While the design emphasizes stability and ease of setup, you can temporarily detach components for transport as needed, aided by the ergonomic handle on the machine.

Consider your tile size needs (up to 24-inch cuts), tile material (porcelain/stone require a robust blade), frequency of use (occasional DIY vs. professional workload), and the convenience of included accessories (blade, pusher, water pump, and stand). Compare power, capacity, and total cost against other Fepy options to determine which model aligns with your workflow and long-term needs.