كابل دوكاب الأحادي المحمي (PVC) قياس (1.5mm) طول (100m) باللون الأحمر

This is a 1.5 mm² red single-core copper conductor designed for live/phase connections in lighting loops and control runs. Its flexible PVC insulation makes pulling through conduits easier, and it’s suitable for low-voltage residential and commercial wiring.

Key specs include a copper conductor with a 1.5 mm² cross-section, red PVC insulation, a 100 m spool length, flexible and easy-to-install construction, red color coding for live/phase, and a temperature-resistant, durable jacket suitable for low-voltage applications.

Red insulation indicates a live or phase conductor, helping you identify circuits quickly and reducing wiring mistakes during installation and maintenance.

Plan your route, avoid sharp bends, and follow recommended bending radii. Use fish tape or pulling tools to guide the cable, cut to length as needed, strip conductors carefully, and ensure proper strain relief and secure conduit fittings after installation.

It is intended for indoor, low-voltage residential and commercial wiring, performing well in typical temperature ranges and environments where phase connections and lighting/control circuits are required.

Measure the run you need, add extra length for fittings, and select the 100 m spool as a practical default. You can cut the cable on site to the exact length required.

If you need a smaller cross-section, you might consider Ducab PVC Single Core Cable 1.0 mm² Red 100m (https://fepy.com/ducab-pvc-single-core-cable-1-0mm2-red-100m). For a larger cross-section, Ducab PVC Single Core Cable 2.5 mm² Red 100m (https://fepy.com/ducab-pvc-single-core-cable-2-5mm2-red-100m) is another option. Both offer similar insulation and copper conductors but differ in current-carrying capacity and wiring footprint.

Use this cable only within its low-voltage rating, keep insulation intact, avoid physical damage, and follow local electrical codes for residential or commercial installations. Remember that red indicates a live conductor, so plan wiring diagrams accordingly.

You’ll typically need wire cutters/strippers, a voltage tester, conduit fittings, pulling tools (like fish tape), cable clips or staples, and strain-relief components. Always wear appropriate PPE and follow safety guidelines.

It provides reliable copper conductivity, flexible pulling through conduits, durable PVC insulation, and clear live/phase color-coding. This combination simplifies wiring tasks for phase connections and reduces installation time in both renovation and new-build projects.

Store in a dry, clean area away from moisture. Unwind the cable gently, avoid kinks or sharp bends, and keep the spool on a proper stand or reel to maintain the insulation integrity and ease future use.

You can explore alternatives such as Ducab PVC Single Core Cable 1.0 mm² Red 100m at https://fepy.com/ducab-pvc-single-core-cable-1-0mm2-red-100m and Ducab PVC Single Core Cable 2.5 mm² Red 100m at https://fepy.com/ducab-pvc-single-core-cable-2-5mm2-red-100m for different current-carrying needs.