كابل ( PVC ) أحادي من ( Ducab ) - لون (Yellow) - قياس (1.5mm x 100 Yard)

Conductor: high-conductivity copper; Cross-section: 1.5 mm²; Insulation: yellow PVC; Length: 100 yards per spool; Flexible copper conductors; Suitable for low-voltage applications; Durable insulation; Color-coded for easy identification; Designed for temperature stability and wear resistance.

The 1.5 mm² version carries more current and typically has a lower voltage drop over the same distance than the 1.0 mm² cable, making it better for slightly higher loads. For lighter loads, the 1.0 mm² may suffice. See the 1.0 mm² option here: https://fepy.com/products/ducab-pvc-single-core-cable-1-0mm-yellow

The 2.5 mm² variant can carry substantially more current and is suited for heavier circuits, with lower voltage drop under higher loads. Choose 2.5 mm² for larger applications and 1.5 mm² for moderate loads. See the 2.5 mm² option here: https://fepy.com/products/ducab-pvc-single-core-cable-2-5mm-yellow

The cable is designed for general wiring with yellow PVC insulation and is suitable for dry indoor locations and general-purpose use. If you need outdoor exposure or damp environments, use appropriate weather-rated or conduit-protected installations and follow local electrical codes.

Strip the conductor ends to expose enough copper for a secure connection (typically around 7–12 mm, depending on the terminal). Use appropriate connectors or terminal blocks rated for 1.5 mm² and avoid nicking or damaging the insulation during stripping.

Follow local electrical codes and standards, ensure the conductor size matches the load, keep cables away from heat sources, and use proper protection (such as conduits or enclosures) in accordance with the installation environment. Color coding (yellow) helps identify earth/ground paths to reduce wiring mistakes.

Yes. 1.5 mm² single-core wires are commonly compatible with standard low-voltage terminals and connectors. Always verify that your terminal or connector is rated for 1.5 mm² conductors and for the intended current.

Fepy typically accepts returns within a specified window (e.g., 30 days) for unused items with proof of purchase. Check your order details for the exact return window and conditions.

Yellow insulation is commonly used to indicate earth/ground conductors in many wiring standards, helping to quickly identify safety-critical paths and reduce the risk of mis-wiring during installation.

Ideal for lighting circuits, small-power feeders, residential wiring, light commercial installations, and indoor wiring runs where a flexible 1.5 mm² copper conductor is appropriate and color-coded earth identification is beneficial.

Calculate the expected load (in amps) and compare it to the ampacity rating for 1.5 mm² copper conductors in your region. Consider voltage drop over the run length and choose a cross-section that meets both current and distance requirements. If in doubt, consult a licensed electrician or refer to local electrical codes.