E-03034 - THIN CUT-OFF WHEEL 115 X1.0X22 A60U MAKITA

Specifications: 115 mm diameter, 1.0 mm thickness (thin kerf), 22 mm bore, A60U grade, Makita compatibility. It’s intended for clean, narrow-cut metal work on ferrous materials.

Best for ferrous metals like mild steel and iron. Avoid non-metal materials and always test on scrap when cutting unfamiliar materials. Use on the recommended grinder speed and proper guard to ensure safe operation.

Before installing, unplug the grinder. Remove the old wheel, inspect the spindle and flange, and ensure the bore (22 mm) matches your grinder’s arbor. Place the wheel on the spindle with the correct flange, tighten the central nut securely, and reattach the guard before use.

Always wear eye protection, gloves, and a face shield. Check the wheel for cracks or damage before use, ensure the guard is in place, and operate the grinder at or below its rated speed. Avoid side loading the wheel and let the wheel do the cutting without forcing it.

Alternatives on Fepy.com include: E-03035 Thin Cut-Off Wheel 115 x 1.0 x 22 A60U Makita — https://fepy.com/en/products/e-03035-thin-cut-off-wheel-115-x-1-0-x-22-a60u-makita, E-03036 Thin Cut-Off Wheel 125 x 1.0 x 22 A60U Makita — https://fepy.com/en/products/e-03036-thin-cut-off-wheel-125-x-1-0-x-22-a60u-makita, and E-03037 Thin Cut-Off Wheel 115 x 0.8 x 22 A60U Makita — https://fepy.com/en/products/e-03037-thin-cut-off-wheel-115-x-0-8-x-22-a60u-makita.

Ideal for metal fabrication tasks such as cutting steel bars, brackets, pipes, bolts, and a variety of metal components in workshops and on-site, where precise, narrow cuts are needed and material loss must be minimized.

Use the wheel with an appropriate guard and a steady feed, avoid overheating by not applying excessive pressure, ensure proper clamping of workpieces, regularly inspect the wheel for wear or damage, and keep the work area clean and free of debris that could cause wheel binding.

Store wheels in a dry, dust-free environment away from moisture and direct sunlight. Keep them in their packaging or a dedicated container to prevent contamination and accidental damage. Handle wheels carefully to avoid cracks or chips.

If you need a 115 mm wheel with a 22 mm bore and a thin kerf for ferrous metal cutting, E-03034 is a solid choice. Compare bore compatibility, thickness, and wheel diameter with your grinder and the specific cut you need (e.g., slightly thicker cuts or different diameters may be better for certain tasks). The listed alternatives offer similar fits with small variations in size or kerf that may better suit your exact job.

If you’re not satisfied, you can explore the standard return options offered by Fepy for non-worn or unused items within the applicable return window. To start, contact Fepy support to initiate a return and confirm any conditions or restocking policies that may apply.