جهاز التغليف و اغلاق الأكياس الحراري من إيجل (Eagle) قياس (200mm) بزمن تسخين (0.2-1.5Sec) موديل (EIS-200)

Seal length: 200 mm; seal width: 2 mm; max material thickness: 0.3 mm; power: 300 W; sealing time: 0.2–1.5 seconds; voltage: 110–230 V; power corded design for steady performance.

Suitable for poly bags and laminated films up to about 0.3 mm thick. Not recommended for foil or metal foils. Always verify film compatibility with heat sealing before use.

Place the bag edge under the sealing bar, align the film, and press the handle to initiate sealing. Hold for 0.2–1.5 seconds, then release and allow a brief cooldown before handling. Ensure the sealer is plugged into a suitable 110–230 V outlet.

Ideal for small to mid-size packaging tasks: shipping poly bags for e-commerce orders, product samples, bakery or snack packaging, and general product protection on busy packing lines.

The EIS-200 is mid-range in seal length and power. The EIS-100 offers a shorter 100 mm seal for smaller bags with lower power, while the EIS-300 provides a longer 300 mm seal for larger bags and higher throughput. See the alternatives here: EIS-100: https://fepy.com/product/eagle-eis-100-impulse-heat-sealer, EIS-300: https://fepy.com/product/eagle-eis-300-impulse-heat-sealer

Keep hands clear of the sealing bar, use on a stable heat-resistant surface, unplug when not in use, and allow the unit to cool briefly after sealing. Avoid contact with hot surfaces and keep liquids away from the device.

Yes. Use a stable, level surface and ensure access to a suitable 110–230 V power outlet. Provide adequate clearance around the unit for ventilation and safe handling of sealed products.

Check film compatibility and thickness (≤0.3 mm), ensure the bag edge is straight and fully seated under the seal, verify the sealing time setting (0.2–1.5 s), and inspect for wrinkles or moisture in the film. If problems persist, re-check alignment and try a fresh section of film.

Yes. It offers a balanced combination of seal length (200 mm), 300 W power, fast sealing times, and versatility for varying bag sizes, making it suitable for expanding packaging workflows on a mid-sized budget.