جهاز التغليف و اغلاق الأكياس الحراري من إيجل (Eagle) قياس (300mm) بزمن تسخين (0.2-1.5Sec) موديل (EIS-300)

It’s designed for a range of plastic films commonly used in packaging. The sealing thickness is up to about 0.4 mm, making it suitable for thin to medium-thickness bags such as PE/PP-based films and laminated pouches used in food, pharma, and retail applications.

Key specs include a 300 mm seal length, 3 mm seal width, 400 W power, sealing time of 0.2–1.5 seconds, and an input voltage range of 110–230 V AC. It’s built for durable, fast sealing and features a user-friendly control panel for setting timing and temperature as needed.

Ideal for high-volume packaging operations in food service, grocery, pharmaceutical labeling, and retail goods. It’s well-suited for sealing bags of snack items, dried foods, medical or cosmetic sachets, and other flexible plastic pouches that require fast, reliable seals.

1) Place the heat sealer on a stable surface and plug into a suitable outlet. 2) Power on and set your desired sealing time and, if applicable, temperature using the control panel. 3) Align the bag on the seal bar and press the handles to initiate the seal. 4) Allow the seal to cool briefly before removing the bag. 5) Clean the seal area after use and store safely.

Always unplug the unit before cleaning or maintenance. Keep hands away from the hot sealing surface when in use. Use the machine on a stable, non-slip surface and ensure the area is clear of liquids and flammables. Train operators on proper hand placement and release timing to avoid injuries.

Typically you’ll receive the EIS-300 heat sealer with its power cord and a user manual. Depending on the vendor, spare parts such as Teflon sheets or replacement seals may be available separately—check compatibility with your film type and thickness before purchasing.

Compared to smaller 150–200 mm models, the EIS-300 offers a longer 300 mm seal length for wider bags and higher throughput. It also uses a 400 W heater for efficient seals on a broad range of films. For longer-term line efficiency, you might also consider slightly larger 400–600 mm models that extend seal length while maintaining fast cycle times.

Yes. Ensure the film is properly aligned and free of wrinkles. Use the correct sealing time for the material thickness, and avoid over-sizing bags beyond the max seal length. Let the seal cool briefly before handling to prevent delamination or soft seals.

Check material compatibility and thickness (ensure it’s within the 0.4 mm range). Verify the seal time is appropriate for the film; if the seal looks weak, increase the sealing time slightly or confirm the heater isn’t experiencing intermittent power. Ensure the bag is properly seated and there is adequate pressure on the seal bars. Finally, inspect the heating element for any debris or wear.

If you regularly seal 300 mm wide bags and need fast cycle times, the EIS-300 is a strong middle-ground choice. For smaller operations with narrow bags, a shorter model may offer adequate speed and lower cost. For high-volume lines requiring longer seals, a larger model with 400–600 mm seal length could improve throughput at the expense of footprint and cost.

You can explore similar options from Eagle on Fepy’s catalog to compare features, prices, and specs. For example, consider these nearby options: Eagle EIS-150 Impulse Heat Sealer (https://fepy.com/product/eagle-eis-150-impulse-heat-sealer) and Eagle EIS-400 Impulse Heat Sealer (https://fepy.com/product/eagle-eis-400-impulse-heat-sealer). These pages provide at-a-glance spec differences to help you decide which model best fits your scale and material needs.