Question 1

What is the Eagle Stainless Steel Test Weight Load used for?

Accepted Answer

It's a precision calibration weight designed to verify and adjust the accuracy of scales and balances in labs and industrial settings.

Question 2

What are the main specs and materials of this weight?

Accepted Answer

The weight is made from high-quality stainless steel with a polished finish. It has a 5 kg load capacity and features nominal masses listed as 25 mg and 80 mg, with F1/F2 class certification for calibration reliability.

Question 3

What does F1/F2 class certification mean for this test weight?

Accepted Answer

F1/F2 class certification indicates tight tolerances suitable for precision calibration. It helps ensure traceable, repeatable weight measurements on calibrated scales and balances.

Question 4

What sizes or variants are available for this product?

Accepted Answer

This weight is designed for 5 kg capacity with reference nominal masses around 25 mg and 80 mg. It’s intended for mg-level calibration tasks alongside the 5 kg main mass.

Question 5

How do I use this weight to calibrate a scale or balance?

Accepted Answer

1) Turn on and zero the scale with an empty pan. 2) Place the weight gently on the measurement plane. 3) Note the reading and adjust the scale’s calibration if needed. 4) For higher accuracy, repeat with additional reference masses and confirm readings across the range.

Question 6

How should I clean and maintain this weight?

Accepted Answer

Wipe with a soft, lint-free cloth after use. Avoid harsh chemicals or abrasives. Store in a dry, protected case or location to prevent corrosion and fingerprints on the polished surface.

Question 7

Is this weight safe to handle and compliant for lab use?

Accepted Answer

Yes. Constructed from stainless steel for durability and corrosion resistance, it’s suitable for standard lab environments. Handle with care to avoid impact or dropping, and keep away from corrosive chemicals to preserve the finish.

Question 8

How does this Eagle test weight compare to other calibration weights on Fepy?

Accepted Answer

For broader mg-level calibration options, you can consider the Eagle Stainless Steel Calibration Weight 1 kg (https://fepy.com/products/eagle-stainless-steel-calibration-weight-1kg) and the Eagle Stainless Steel Calibration Weight 100 g (https://fepy.com/products/eagle-stainless-steel-calibration-weight-100g). These provide alternative reference masses while maintaining stainless steel durability and similar quality standards.

Question 9

What are common use cases and applications for this weight?

Accepted Answer

Ideal for calibrating analytical and precision scales, bench scales, and balances in laboratories, quality control labs, and industrial settings where accurate mass measurement is critical.

Question 10

Are there installation or setup tips I should know?

Accepted Answer

Ensure the scale is clean, level, and taring is set to zero before applying the weight. Place weights gently on the center of the weighing pan and avoid placing on edges or unstable surfaces to prevent measurement errors.

أوزان المعايرة و الاختبار إيجل (Eagle) المصنوعة من الستانلس ستيل وزن (1-1000gm) قياس (23.5x17x12Cm) من التصنيف (F1)

Features & Benefits

Specification

Attachments

Frequently Asked Questions