EcoFlow Delta 2 Black Portable Power Station 1800W AC/100W 1024Wh

The unit measures 399 × 211 × 287 mm and weighs approximately 12.2 kg, making it transportable between work areas, campsites and homes. Use the integrated carrying points correctly, secure it during vehicle transport and avoid dropping or stacking heavy materials on it. Plan two-handed handling where site access is uneven or where local manual-handling procedures require it.

Switch off unused outputs, disconnect all loads and store the unit in a cool, dry and ventilated indoor location. Avoid long-term storage in a hot vehicle, direct sunlight or a dusty outdoor container. Maintain the battery at the storage charge level recommended by EcoFlow, check it periodically, and recharge as directed in the manual to reduce the risk of excessive discharge.

Use only good-quality extension leads rated for the connected load and compatible with the unit's outlet type. Keep cables as short as practical, fully unwind cable reels under substantial load, and protect leads from water, sharp edges, vehicle traffic and crushing. Avoid connecting multiple adaptors or overloaded power strips, and regularly inspect plugs and cables for heat or damage.

Conduct a basic load and location assessment before use. Keep the power station dry, maintain ventilation, protect it from falling materials and metal debris, and use only undamaged, correctly rated cables. Do not overload outputs, modify connectors, open the enclosure or use the unit near flammable gases. Site use should also follow the project's electrical safety plan and applicable UAE occupational health and safety requirements.

The USB-C connection can provide up to 100W to compatible devices that support the required USB Power Delivery profile. It is useful for charging supported laptops, tablets, phones, cameras and field electronics without using an AC adaptor, which may improve overall efficiency. Charging speed is determined by the connected device, cable rating and supported charging protocol.

Yes, its 1024Wh capacity can support selected essentials such as a router, mobile devices, laptops, LED lighting, fans and other compatible low-to-moderate loads. Prioritize critical equipment and calculate the combined wattage before connecting it. Runtime is limited by battery capacity, and high-power appliances such as electric ovens, large water heaters and central air-conditioning systems are generally unsuitable.

Lithium iron phosphate, or LFP, chemistry is valued for thermal stability, dependable repeated use and long service potential compared with many conventional portable battery chemistries. Actual battery life depends on operating temperature, discharge depth, charging practices, storage conditions and load patterns. Following EcoFlow's charging and storage instructions helps preserve long-term performance.

Keep the unit away from prolonged direct sunlight, enclosed vehicles, wet areas and heavily dust-laden work zones. Operate and charge it only within the temperature limits given in the official manual, with unobstructed airflow around the cooling vents. On construction sites, place it in a clean, shaded and ventilated location while ensuring that any protective enclosure does not restrict cooling.

The EcoFlow DELTA 2, model EF-DELTA2, is a portable LFP battery power station designed for temporary electricity supply, outdoor activities, mobile work and home backup. It combines 1024Wh of energy storage with up to 1800W rated AC output and a 100W USB-C connection for compatible devices. Its compact 399 × 211 × 287 mm body and 12.2 kg net weight make it suitable for transport between homes, workshops, camps and construction locations.

The DELTA 2 supports flexible charging through compatible AC mains, solar and vehicle charging inputs. Use EcoFlow-approved or technically compatible charging cables and follow the input voltage, current and connector limits stated in the product manual. Charging time depends on the chosen method, available input power, battery temperature and current state of charge.

Compatibility depends on the exact regional version of the unit, its socket configuration and the connected appliance's voltage and frequency rating. UAE mains equipment is generally designed around 230V and 50Hz, so buyers should verify the product label and plug type before use. Do not rely on an unapproved travel adaptor for high-load appliances, and use correctly rated cables and accessories.

No permanent installation is normally required because it is a portable power station. Appliances should be connected directly to the appropriate outputs using compatible plugs and cables. Do not back-feed power into a wall socket or building circuit. Any connection to a UAE property distribution board, changeover arrangement or fixed backup circuit must be designed and completed by a qualified electrician in accordance with applicable local authority requirements.

Place the unit upright on a stable, dry and level surface with adequate clearance around its ventilation openings. Inspect the power station and cables, charge it using an approved input method, switch on only the required output section, and then connect compatible devices. Confirm the total load on the display or app and keep cables arranged to prevent trip hazards, crushing and contact with wet surfaces.

Approximate runtime can be estimated by multiplying 1024Wh by an efficiency allowance and dividing the result by the device wattage. For example, a 100W load may theoretically run for roughly 8 to 9 hours after allowing for conversion losses, while a 500W load may run for around 1.5 to 1.8 hours. Actual performance varies with load type, temperature, battery condition, output method and whether other devices are connected.