EcoFlow RIVER 2 Portable Power Station 300W 256Wh

The stated dimensions are 245 × 214 × 142 mm, and the net weight is approximately 3.5 kg. This compact format is useful for storage in site vehicles, workshops, apartments and camping equipment. When planning a storage compartment, allow additional clearance around the unit for ventilation, cable access and safe handling.

It can replace a generator for selected low-power tasks such as charging electronics, operating LED lights and supplying compatible test or communication equipment. It cannot replace a conventional site generator for heavy power tools, pumps, compressors, welding machines or large combined loads. Its main advantages for suitable tasks are quiet operation, no exhaust at the point of use and compact portability.

Switch it off, disconnect all loads and store it in a clean, dry and ventilated indoor location away from direct sunlight, moisture, corrosive chemicals and excessive heat. Do not leave it indefinitely in a fully depleted condition. Check its charge periodically and follow EcoFlow's recommended storage charge level and maintenance interval, especially when the unit will remain unused through the hot UAE summer.

Check the appliance's rated voltage, frequency, continuous wattage and start-up demand, then confirm compatibility with the specific regional RIVER 2 model. Inspect plugs and cables for damage, ensure the total connected load does not exceed 300W and connect high-starting-load devices individually. For UAE use, verify compatibility with the local 230V, 50Hz system and follow the manuals supplied with both products.

Use it only in dry, protected conditions unless the official product documentation explicitly confirms an appropriate environmental protection rating. Keep it away from rain, wet concrete, washdown areas, irrigation, standing water and conductive dust. On construction sites, position it above ground on a stable surface and use suitable protection against impact, falling materials and site contamination.

Operate it in a dry, shaded and ventilated location within the temperature range stated in the official manual. Do not cover the unit, obstruct its vents or position it beside heaters, generators, flammable materials or direct sunlight. Avoid leaving it in parked vehicles, site containers or unconditioned storage spaces where UAE summer temperatures may become extreme. Allow an overheated unit to return to a safe temperature before charging or operating it.

Multiple compatible devices may be connected across the five available output ports, but their combined demand must remain within the power station's output limits. Before connecting several devices, total their continuous wattage and consider any start-up surge. Power may also be shared differently between AC, USB and DC outputs, so refer to the product manual for port-specific voltage, current and power limits.

Lithium iron phosphate, or LFP, chemistry is valued for thermal stability, long cycle life and dependable repeated charging. These characteristics make the RIVER 2 suitable for regular camping, home-backup and mobile-work use. Battery longevity still depends on correct operation, temperature management and storage practices, so the unit should be kept within the manufacturer's specified environmental limits.

Its compact 3.5 kg design makes it useful for camping, overlanding and outdoor device charging. It can support compatible lighting, phones, cameras, laptops and other electronics within the 300W output limit. In desert environments, keep it inside a shaded and ventilated area, prevent sand from blocking its openings, avoid moisture and do not operate or store it in a closed vehicle where temperatures can rise rapidly.

The EcoFlow RIVER 2 is a compact portable power station designed for camping, home backup, mobile work and light construction-site applications. It combines a 256Wh LFP battery with 300W rated output, up to 600W surge capability, five output ports, fast AC charging, up to 110W solar input and a 30 ms backup-power transfer function. Its 245 × 214 × 142 mm dimensions and 3.5 kg net weight make it convenient to carry between homes, vehicles, campsites and project locations.

The 30 ms transfer function can help keep compatible equipment operating during brief mains interruptions when the RIVER 2 is connected and configured correctly. It may suit routers, communication equipment and selected electronics, but it is not a zero-transfer online UPS. Sensitive servers, medical equipment, safety systems and devices that specify a shorter transfer time should be assessed against the equipment manufacturer's requirements before use.

Place the compatible panel in unobstructed sunlight and adjust its angle toward the sun while keeping the RIVER 2 itself shaded, dry and well ventilated. Clean accumulated sand and dust using the panel manufacturer's recommended method because contamination can reduce output. Do not place the power station on hot vehicle surfaces or leave it exposed to direct midday sun, rain, irrigation water or blowing sand.

Yes, it supports up to 110W solar input when used with a compatible solar panel and the correct connection cable. Panel voltage, current, connector type and polarity must remain within the power station manufacturer's specified input range; wattage alone is not enough to establish compatibility. UAE sunshine can support effective outdoor charging, but output varies with panel angle, shading, dust, cloud cover and high panel temperatures.

The supplied specification states that fast wall charging can restore the battery in approximately 60 minutes under suitable conditions. Actual time may vary with battery temperature, state of charge, input stability and power-management settings. For use in the UAE, confirm that the supplied regional charging cable and product version are compatible with the local 230V, 50Hz electrical supply before connecting it.