كوع السباكة البلاستيكي (PVC) من (Era) بزاوية (90) درجة قياس (63mm) يدوم طويلا و القابل لإعادة التصنيع يباع بالقطعة

The elbow is made from durable PVC. Benefits include corrosion resistance, a long service life, and ease of recycling at end-of-life, along with reliable, watertight performance when properly installed.

PVC elbows come in various standard pipe sizes. Check the product options on the listing to select the matching socket size for your PVC pipes and use the appropriate cement and primer for a secure fit.

Typical installation steps: dry-fit to check alignment, cut and deburr the pipes square, clean the pipe and fitting surfaces, apply PVC primer, apply solvent cement to both the pipe and the fitting, insert fully, and hold briefly to allow the cement to set. Ensure the joint is properly aligned before cementing.

A proper solvent-weld joint with PVC primer and cement bonds the pipe to the elbow, forming a continuous, watertight connection when the parts are properly seated and cured per the adhesive manufacturer's guidelines.

Yes. The PVC elbow is designed for long-lasting use in drainage applications and is recyclable at end-of-life, supporting both durability and sustainability goals.

It's suitable for drainage and wastewater piping in residential or light commercial setups. It’s important to verify the suitability for potable water if required, as some PVC formulations are optimized for drainage rather than drinking water.

When cutting or modifying PVC, wear eye protection and gloves. Use proper ventilation if sanding or heating PVC. Store and handle fittings away from heat sources, and follow local safety guidelines for solvent-based cements.

For size-specific comparisons, you can consider on-Fepy alternatives like the PVC Elbow 90 Degree 1/2 inch (https://fepy.com/product/pvc-elbow-90-degree-1-2-inch) and the PVC Elbow 90 Degree 3/4 inch (https://fepy.com/product/pvc-elbow-90-degree-3-4-inch). These products provide similar 90° fittings in common sizes, allowing you to choose based on pipe diameter and required flow.

Use it when you need to route a pipe around an obstacle, create a clean 90° turn in a drainage run, or modify layouts in basements, bathrooms, or utility rooms where a straight line isn’t feasible.

Match the elbow’s nominal size to your pipe’s outer diameter and the fittings you’re using. Use the same PVC family for compatibility (e.g., schedule and wall thickness) and verify mating dimensions before purchasing.

Given its durable PVC construction, recyclability, and straightforward installation, it offers competitive value for standard drainage applications. For a direct price-and-feature comparison, review the ERA elbow listing alongside similar Fepy elbows in the same size range and material family on the site.