Question 1

What is the ERA PVC Elbow 90 Degree Long-Lasting and Readily Recyclable used for?

Accepted Answer

It's a 90-degree PVC elbow fitting designed to connect two PVC pipes, enabling a clean 90° turn for drainage or wastewater piping in plumbing projects.

Question 2

Is this product a good value compared with similar elbows on Fepy?

Accepted Answer

Given its durable PVC construction, recyclability, and straightforward installation, it offers competitive value for standard drainage applications. For a direct price-and-feature comparison, review the ERA elbow listing alongside similar Fepy elbows in the same size range and material family on the site.

Question 3

How should I measure and choose the right size for my project?

Accepted Answer

Match the elbow’s nominal size to your pipe’s outer diameter and the fittings you’re using. Use the same PVC family for compatibility (e.g., schedule and wall thickness) and verify mating dimensions before purchasing.

Question 4

What are some practical use cases or scenarios for this elbow?

Accepted Answer

Use it when you need to route a pipe around an obstacle, create a clean 90° turn in a drainage run, or modify layouts in basements, bathrooms, or utility rooms where a straight line isn’t feasible.

Question 5

How does this compare to other PVC 90-degree elbows on Fepy?

Accepted Answer

For size-specific comparisons, you can consider on-Fepy alternatives like the PVC Elbow 90 Degree 1/2 inch (https://fepy.com/product/pvc-elbow-90-degree-1-2-inch) and the PVC Elbow 90 Degree 3/4 inch (https://fepy.com/product/pvc-elbow-90-degree-3-4-inch). These products provide similar 90° fittings in common sizes, allowing you to choose based on pipe diameter and required flow.

Question 6

Are there safety or handling considerations I should know about?

Accepted Answer

When cutting or modifying PVC, wear eye protection and gloves. Use proper ventilation if sanding or heating PVC. Store and handle fittings away from heat sources, and follow local safety guidelines for solvent-based cements.

Question 7

What applications is it suitable for?

Accepted Answer

It's suitable for drainage and wastewater piping in residential or light commercial setups. It’s important to verify the suitability for potable water if required, as some PVC formulations are optimized for drainage rather than drinking water.

Question 8

Is this elbow durable and recyclable?

Accepted Answer

Yes. The PVC elbow is designed for long-lasting use in drainage applications and is recyclable at end-of-life, supporting both durability and sustainability goals.

Question 9

How does it create a watertight seal and prevent leaks?

Accepted Answer

A proper solvent-weld joint with PVC primer and cement bonds the pipe to the elbow, forming a continuous, watertight connection when the parts are properly seated and cured per the adhesive manufacturer's guidelines.

Question 10

How do I install the ERA PVC elbow?

Accepted Answer

Typical installation steps: dry-fit to check alignment, cut and deburr the pipes square, clean the pipe and fitting surfaces, apply PVC primer, apply solvent cement to both the pipe and the fitting, insert fully, and hold briefly to allow the cement to set. Ensure the joint is properly aligned before cementing.

Question 11

What pipe sizes does it fit?

Accepted Answer

PVC elbows come in various standard pipe sizes. Check the product options on the listing to select the matching socket size for your PVC pipes and use the appropriate cement and primer for a secure fit.

Question 12

What materials is this elbow made from and what are the main benefits?

Accepted Answer

The elbow is made from durable PVC. Benefits include corrosion resistance, a long service life, and ease of recycling at end-of-life, along with reliable, watertight performance when properly installed.

Question 13

What is the ERA PVC Elbow 90 Degree Long-Lasting and Readily Recyclable used for?

Accepted Answer

It's a 90-degree PVC elbow fitting designed to connect two PVC pipes, enabling a clean 90° turn for drainage or wastewater piping in plumbing projects.

Question 14

Is this product a good value compared with similar elbows on Fepy?

Accepted Answer

Given its durable PVC construction, recyclability, and straightforward installation, it offers competitive value for standard drainage applications. For a direct price-and-feature comparison, review the ERA elbow listing alongside similar Fepy elbows in the same size range and material family on the site.

Question 15

How should I measure and choose the right size for my project?

Accepted Answer

Match the elbow’s nominal size to your pipe’s outer diameter and the fittings you’re using. Use the same PVC family for compatibility (e.g., schedule and wall thickness) and verify mating dimensions before purchasing.

كوع السباكة البلاستيكي (PVC) من (Era) بزاوية (90) درجة يدوم طويلا و القابل لإعادة التصنيع يباع بالقطعة

Features & Benefits

Specification

Attachments

Frequently Asked Questions

What is the ERA PVC Elbow 90 Degree Long-Lasting and Readily Recyclable used for?

Is this product a good value compared with similar elbows on Fepy?

How should I measure and choose the right size for my project?

What are some practical use cases or scenarios for this elbow?

How does this compare to other PVC 90-degree elbows on Fepy?

Are there safety or handling considerations I should know about?

What applications is it suitable for?

Is this elbow durable and recyclable?

How does it create a watertight seal and prevent leaks?

How do I install the ERA PVC elbow?

What pipe sizes does it fit?

What materials is this elbow made from and what are the main benefits?

What is the ERA PVC Elbow 90 Degree Long-Lasting and Readily Recyclable used for?

Is this product a good value compared with similar elbows on Fepy?

How should I measure and choose the right size for my project?