وصلة التفريع البلاستيكية (PVC) من (ERA) باللون الأبيض قياس (1")

Nominal size: 1 inch; material: white PVC; socket-type joints that are solvent compatible for leakproof connections; corrosion-resistant and lead-free; BS EN 1452-2 certified for safe and quality standards; designed for hot and cold water applications.

Yes, it is designed for hot and cold water installations and is lead-free, making it appropriate for drinking water systems when installed according to relevant codes.

Install by first cutting the pipes square, deburring the ends, dry-fitting to verify alignment, then applying a compatible PVC solvent cement to the socket and pipe ends. Insert the pipe fully into the socket, hold briefly to ensure bonding, and allow the cement to cure per the product instructions before pressurizing the system.

Ideal for joining three lines in residential plumbing, irrigation systems, agricultural water lines, and industrial piping where 1-inch pipe fittings are appropriate.

Regularly inspect joints for leaks, avoid mechanical stress on the joints, replace any cracked or damaged tees, and flush systems periodically to prevent debris from accumulating in joints.

Fepy offers other size PVC tees to fit different piping needs, including: 1/2-inch white PVC Tee: https://fepy.com/product/era-pvc-tee-1-2-inch-white; 1-1/4-inch white PVC Tee: https://fepy.com/product/era-pvc-tee-1-1-4-inch-white; 1-1/2-inch white PVC Tee: https://fepy.com/product/era-pvc-tee-1-1-2-inch-white.

Smaller tees (e.g., 1/2-inch) are suited to lower-flow lines and compact installations, while larger tees (1-1/4-inch or 1-1/2-inch) handle higher flow and bigger pipe networks. The three-way configuration remains the same, but flow capacity and space requirements scale with size. Always match pipe size and pressure expectations to your system.

The fitting is lead-free and BS EN 1452-2 certified, intended for use with standard PVC piping, and suitable for hot and cold water. Use the proper solvent cement, ensure clean joint surfaces, and follow local plumbing codes for drinking water systems and pressure ratings.

This PVC Tee offers durability, corrosion resistance, leakproof solvent joints, and easy installation at a cost-effective price. It is compatible with standard 1-inch PVC piping and supports long-term performance in multiple applications. Consider whether you need the 1-inch size now and whether you anticipate future volume expansions for value.

Yes—cut pipes square, deburr edges, clean surfaces, apply the correct amount of solvent cement, insert the pipe fully into the socket, and allow proper cure time before pressurizing the system. Avoid stressing joints after installation.

Plan the layout, dry-fit to verify alignment, cut and deburr all pipes, apply solvent cement to all socket and pipe ends, assemble each joint starting with one branch, then test for leaks after curing.