وصلة السباكة البلاستيكية (UPVC) على شكل (Y-tee) من (ERA) قياس (2") تباع بالقطعة

It's a UPVC Y-shaped pipe fitting designed to split or combine flow in plumbing systems. It provides a leakproof joint and aims for a higher flow rate, making it suitable for pressurized water and sanitary piping in residential or commercial setups.

The Y Tee uses a compression-style joint at its connections, which tightens securely around the pipe to seal against leaks. This design also simplifies installation, reducing assembly time and eliminating the need for complex threading in many cases.

The fitting is built with a UPVC (PVC) body, chosen for strength and durability. UPVC provides good heat and chemical resistance, allowing it to withstand typical plumbing environments and some chemical exposure while maintaining structural integrity.

It’s suited for pressurized plumbing systems and sanitary piping. It can be used in scenarios where other materials like copper, stainless steel, or metal piping are combined, thanks to its robust compression joints and chemical resistance.

Yes, the design emphasizes a higher flow rate by optimizing the internal path and reducing flow restrictions at the branch. The result is improved flow compared with some conventional tees, especially in pressurized lines.

Sizes vary by listing. Check the product page for exact available diameters (e.g., common UPVC sizes are 20 mm, 25 mm, 32 mm in many markets). To choose, match the fitting to your pipe diameter and system pressure requirements; if in doubt, consult your piping schematics or contact support.

General steps: 1) depressurize the system and cut the pipe to length with clean, square edges; 2) prepare the pipe ends (de-burr if needed); 3) fit the compression joints with the appropriate fittings and tighten securely; 4) if recommended, apply proper solvent cement per UPVC standards; 5) slowly re-pressurize and check for leaks before full operation.

UPVC fittings are commonly used for potable water and some chemical services. Verify that the specific product is certified for potable water in your region and review any local compliance requirements or ratings noted on the listing. For chemical compatibility, confirm that the chemicals in your system are within the material’s approved resistance range.

Always depressurize and drain lines before installation, wear gloves and eye protection, and follow local code requirements. Use appropriate cutting tools to avoid rough edges, and ensure proper ventilation if adhesives or solvent cements are used. Store fittings in a cool, dry place away from direct sunlight before installation.

Warranty and return terms can vary by seller and region on Fepy. Review the specific product listing for warranty duration and return conditions. If you encounter issues, contact Fepy support or the seller to discuss whether a return, replacement, or refund applies within the stated policy window.

UPVC fittings like this Y Tee are generally lighter, more affordable, and highly corrosion-resistant compared with brass tees. They are well-suited for many piping systems but may have lower temperature or high-load limits than metals. For non-corrosive, cost-effective, and quick-install plumbing, UPVC is often preferred; for high-heat or high-strength applications, brass or metal tees might be better. You can compare specific models on Fepy to see exact dimensions, compatibility, and price.

Consider these related UPVC fittings on Fepy for quick comparison: Unicor UPVC Tee (https://fepy.com/product/unicor-upvc-tee) and UPVC Y Tee with Compression Fitting (https://fepy.com/product/upvc-y-tee-compression-fitting). These pages provide additional options with similar functionality to help you choose the best fit for your project.