ورق صنفرة جالاكسي (60)

It uses premium aluminum oxide blended with zirconia for long-lasting cutting performance, good control, and durable life. It includes a dust-reducing center hole design and a thinner backing to maximize sheet usage.

Suitable for wood, paint, and metal, Galaxy 60 yields a smooth, even finish with improved control. It’s ideal for shaping surfaces, removing light imperfections, and preparing bases for finishing.

The center hole design helps with dust removal, reducing clogging and improving sanding efficiency, especially on contoured or curved surfaces.

Mount the sheet on a sanding block or compatible orbital sander, use even, light-to-moderate pressure, move with long strokes following the grain where appropriate, and periodically check for clogging. For a smoother finish, work progressively from coarser to finer grits when needed.

Yes. Galaxy 60 is designed for compatibility with common sanding blocks and most orbital sanders. Ensure the sheet is securely attached before sanding and choose the appropriate backing for your tool.

Wear eye protection and a dust mask or respirator, work in a well-ventilated area, and avoid inhaling dust. If sanding painted or treated materials, consider a spray booth or dust extraction to minimize exposure.

Grit 60 removes material faster for rough shaping, while 80 and 120 produce finer finishes. For initial material removal, start with 60, then switch to higher grits for a smooth finish. Galaxy 80 and Galaxy 120 are available on Fepy for direct comparisons: https://fepy.com/product/galaxy-80-sand-paper and https://fepy.com/product/galaxy-120-sand-paper.

If you’re exploring alternatives with similar performance, you might look at Premium Aluminum Oxide Sandpaper 60 Grit at https://fepy.com/product/premium-aluminum-oxide-sandpaper-60-grit and Zirconia Sandpaper 60 Grit at https://fepy.com/product/zirconia-sandpaper-60-grit. These offer durable formulations for different finishing needs.

Use Galaxy 60 for rough shaping and surface preparation in fine woodworking, automotive refinishing, and various DIY projects where you need to remove material quickly and then transition to finer finishes.

Consider the desired finish and stage of your project. 60 grit is for initial material removal; 80/100 grit can refine surfaces, and 120+ grit provides a very smooth finish. For best results, plan a progression from rough to fine grits and test on a small area first.

Keep the sanding surface clean to reduce clogging, use appropriate pressure, and avoid forcing the paper. The anti-clogging design and durable materials help extend life when used with suitable speeds and surfaces.