Question 1

What sizes are available and can GI Lintels be cut to fit my opening?

Accepted Answer

GI Lintels come in a range of widths and lengths to suit different masonry openings, and they can be cut to size on-site to fit exact dimensions while maintaining proper bearing on both ends.

Question 2

How does GI Lintel compare to other lintels available on Fepy?

Accepted Answer

Compared to non-galvanized or alternate materials, GI Lintels offer enhanced corrosion resistance and longer service life due to galvanization. For a quick side-by-side, you can explore similar options on Fepy such as galvanized steel lintels and other metal lintels here: https://fepy.com/product/galvanized-steel-lintel and https://fepy.com/product/mild-steel-lintel-non-galvanized. If you’re considering lighter or different materials, you can also review aluminum lintels at https://fepy.com/product/aluminum-lintel.

Question 3

What is the return policy if the GI Lintel doesn’t fit or you change your mind?

Accepted Answer

If you’re unsure about fit or project requirements, you can refer to Fepy’s general return policy for eligibility, timeframes, and instructions. It’s a good idea to keep the packaging intact and contact support within the specified window to discuss options.

Question 4

Do GI Lintels meet building codes and standards?

Accepted Answer

GI lintels are a common, code-adaptable solution for many masonry openings. Always verify local building codes and project specifications, and use the correct size and bearing as required for your site.

Question 5

What safety considerations should I keep in mind when handling GI Lintels?

Accepted Answer

Wear appropriate PPE (gloves, eye protection, steel-toe boots), avoid bending or dropping heavy lintels, use proper lifting techniques or equipment, and ensure the lintel is stored flat and undamaged before installation to prevent sharp edges or compromising the coating.

Question 6

What are the basic installation steps for a GI Lintel?

Accepted Answer

Typical steps: (1) prepare and level the supporting masonry, (2) place temporary supports, (3) position the lintel so it sits evenly on the bearing points, (4) bed the lintel in mortar or a suitable bedding, (5) ensure it is level and centered, (6) complete masonry above and around the ends, and (7) allow proper curing before loading the opening.

Question 7

How do I determine the right size and bearing for my opening?

Accepted Answer

Measure the opening width and choose a lintel that spans the opening with adequate end bearing on each side. For load-bearing or larger openings, consult structural guidelines or a qualified engineer to ensure the lintel can support the expected load.

Question 8

In what applications are GI Lintels typically used?

Accepted Answer

They are used to support masonry or timber above openings such as doors and windows in walls, suitable for a wide range of applications from residential to light industrial projects where a durable load-bearing member is needed.

Question 9

Why should I choose a GI Lintel over a non-galvanized lintel?

Accepted Answer

GI lintels offer superior durability and a longer lifespan in many environments due to corrosion protection from the galvanization, making them a more maintenance-free choice for both exterior and interior openings.

Question 10

What makes GI Lintels corrosion-resistant and suitable for longer life?

Accepted Answer

The hot-dip galvanized coating on the mild steel provides a protective layer that resists rust and corrosion, making GI lintels well-suited for exterior use and damp environments with reduced maintenance over time.

Question 11

What exactly is a GI Lintel and what does it do in a masonry opening?

Accepted Answer

A GI Lintel is a structural steel beam made from mild steel that has a hot-dip galvanized coating. It sits above openings like windows or doors in walls to transfer the load from the masonry above to the sides of the opening, helping to prevent cracks and sagging.

Question 12

Are these Galvanized (GI) Lintel-20CM X 200CM rust resistant?

Accepted Answer

Yes, these Galvanized (GI) Lintel-20CM X 200CM available at FEPY are completely rust resistant.

Question 13

How do you deliver these Galvanized (GI) Lintel-20CM X 200CM?

Accepted Answer

After your order placement, our team starts loading your order in our delivery trucks and we ensure quick delivery of your order.

Question 14

Do you provide an offload or installation service?

Accepted Answer

We do provide offloading services, but we do not provide installation services.

Question 15

Do you provide equipment for fitting and maintenance?

Accepted Answer

Yes, we do provide equipment for fitting and maintenance. You can check out our power tools, hand tools, and hardware tool categories.

عتبات من الحديد المجلفن قياس (200X20cm)

Features & Benefits

Specification

Attachments

Frequently Asked Questions