العَتَبات المصنوعة من الحديد المجلفن قياس (6X180cm)

The lintel measures 6 cm in thickness and 180 cm in length. It is designed to span openings up to about 180 cm wide while transferring loads from the wall above to the sides.

This GI lintel is rated to support up to 200 kg (approximately 440 lbs) of load.

It is made from hot-dipped galvanized steel, offering anti-rust protection and enhanced durability for both exterior and interior use.

It is suitable for both exterior and interior applications, including residential and commercial wall openings.

General steps: ensure the opening width matches the lintel length, place the lintel on prepared bearing supports, bed it with mortar, verify it is level, and then proceed with brickwork on both sides, allowing proper mortar curing. For the best results, align with your project specs or consult a structural professional for large openings.

Typical tools include a tape measure, a level, a trowel for mortar, mortar mix, protective gear, and shims as needed to ensure a true, level placement before brickwork resumes.

Modifying or cutting a lintel can compromise structural integrity and is generally not recommended. If a smaller opening is required, choose a lintel size that matches the opening or consult a structural engineer.

Rely on the galvanized coating for corrosion resistance; perform periodic visual inspections for any signs of rust or damage, especially at edges, and keep the top of the lintel clear of debris to allow proper mortar curing and maintenance.

Ensure the lintel is used within its rated load capacity and installed according to standard masonry practices. For larger openings or unique structural conditions, consulting a qualified professional is recommended.

If you’re considering different sizes, here are some alternatives on Fepy you might compare: - Galvanized (GI) Lintel 6x150 cm: https://fepy.com/product/galvanized-lintel-6x150cm - Galvanized (GI) Lintel 6x200 cm: https://fepy.com/product/galvanized-lintel-6x200cm - Galvanized (GI) Lintel 8x180 cm: https://fepy.com/product/galvanized-lintel-8x180cm

Select based on your opening width (choose a lintel that spans the opening with adequate bearing on both sides), expected load, and alignment with wall construction. For openings close to 180 cm, the 6x180 cm version provides a straightforward fit with corrosion-resistant benefits.