Question 1

What is the Geepas Metal Mettal Cutting Disc 115 X 1mm used for?

Accepted Answer

It's a cutting disc designed for metal work, with compatibility for most standard metal cutting saws. The disc is 115 mm in diameter and 1 mm thick, built from sturdy metal and finished with a protective coating to boost durability during cutting tasks.

Question 2

What are the main specifications I should know?

Accepted Answer

Diameter: 115 mm, Thickness: 1 mm, Material: metal. It’s designed for use with angle grinders or circular saws and features a protective coating for increased durability.

Question 3

How do I install this disc on my tool safely?

Accepted Answer

Make sure the tool is powered off and unplugged. Remove the old disc, align the Geepas 115 X 1mm disc with the tool’s arbor, and secure it with the appropriate flange nut. Ensure the disc is firmly tightened, then reattach the guard and power the tool to verify proper operation at a low speed before increasing to full speed.

Question 4

What materials can this disc cut?

Accepted Answer

The disc is described as capable of cutting metal, and it’s noted to be versatile enough to handle plastic and wood as well. Use caution and follow tool guidelines when cutting non-metal materials.

Question 5

Is this disc compatible with most standard metal cutting saws?

Accepted Answer

Yes, it is designed to be compatible with most standard metal cutting saws, making it a versatile choice for many workshop setups.

Question 6

What are some common use cases for this cutting disc?

Accepted Answer

Ideal for metal fabrication tasks, automotive projects, plumbing work, and DIY home improvement projects where precise, clean cuts in metal are required. It can also handle light plastic or wood cutting when needed.

Question 7

What makes this disc durable and safe to use?

Accepted Answer

The disc is made from sturdy metal and features a protective coating intended to extend its life and resist heat buildup during cuts. Always wear eye protection, gloves, and hearing protection, and use the appropriate guard and mounting practices.

Question 8

Are there any installation or usage tips to maximize life and performance?

Accepted Answer

Cool cutting is important—avoid forcing the cut, maintain a steady feed rate, and let the disc do the work. Use proper clamps to secure the workpiece, avoid using a damaged or warped disc, and ensure the tool’s RPM is within the disc’s rated range.

Question 9

What does per pcs mean for this product?

Accepted Answer

Per pcs means the disc is sold individually, so each purchase includes one cutting disc rather than a multi-pack.

Question 10

How does this Geepas disc compare to other cutting discs on Fepy?

Accepted Answer

The Geepas 115 x 1mm disc offers a balance of size, thickness, and durability suited for metal cutting with a protective coating for longevity. If you’re comparing variants, you can look at nearby options like the Geepas 115 x 1.2 mm or 125 x 1 mm discs to see differences in thickness and diameter that may affect cutting speed, heat buildup, and the finish of the cut. Alternatives on Fepy include: Geepas Metal Cutting Disc 115x1-2mm (https://fepy.com/product/geepas-metal-cutting-disc-115x1-2mm-per-pcs) and Geepas Metal Cutting Disc 125x1mm (https://fepy.com/product/geepas-metal-cutting-disc-125x1mm-per-pcs).

Question 11

I’m new to using cutting discs—any starter tips for beginners?

Accepted Answer

Start with a slow, controlled feed rate and let the disc do the cutting without forcing it. Always wear safety gear, check the disc for cracks or damage before use, and replace immediately if you notice any defect. Make sure the disc is appropriate for your tool’s RPM rating and that you’re using the correct guard.

Question 12

What safety precautions should I follow when using this disc?

Accepted Answer

Always wear eye protection, gloves, and hearing protection. Use a guard on your saw, secure the workpiece firmly, and avoid using the disc on warped or damaged materials. Do not exceed the tool’s rated speed for the disc and pause to cool the disc after prolonged cutting to prevent overheating.

Question 13

If I want a similar disc with slightly different dimensions, what options exist on Fepy?

Accepted Answer

You can compare similar Geepas discs with other standard sizes to suit different projects, such as 115 x 1.2 mm or 125 x 1 mm variants. Examples of nearby options on Fepy include: Geepas Metal Cutting Disc 115x1-2mm (https://fepy.com/product/geepas-metal-cutting-disc-115x1-2mm-per-pcs) and Geepas Metal Cutting Disc 125x1mm (https://fepy.com/product/geepas-metal-cutting-disc-125x1mm-per-pcs).

قرص القص المعدني جيباس قياس (115mm) سماكة (1mm)

Features & Benefits

Specification

Attachments

Frequently Asked Questions