لفة رقائق جيوتك وزن (200GSM) قياس (5.6X150M) تغطي مساحة (840M2)

Key specs: 200 GSM weight, width 5.6 meters, length 150 meters, roll area 840 m2, engineered for ground reinforcement with UV and chemical resistance for durability in outdoor environments.

200GSM offers higher tensile strength and thickness than lighter geotextiles (e.g., 150GSM), providing better load transfer, reduced deformation, and improved stabilization of slopes and roadbeds. It is typically preferred for heavier loads and more demanding applications.

Typical use cases include road/base stabilization, driveways and parking areas, slope stabilization and erosion control, soil separation between subgrade and aggregate, and reinforcement for embankments or drainage layers.

Installation steps: 1) Prepare a clean subgrade free of sharp objects; 2) Unroll the fabric along the required alignment; 3) Overlap adjacent sheets by about 30 cm (12 inches); 4) Anchor edges with ground pegs or ballast to prevent movement; 5) Ensure the fabric remains flat with no wrinkles; 6) Cover with the intended aggregate or soil layer as per project design.

A standard overlap of 30 cm (approximately 12 inches) is recommended to ensure proper coverage and continuity of the reinforcement across seams.

Essential items include a utility knife or heavy-duty scissors, measuring tape, chalk line or markers, ground pegs or stakes, a mallet or hammer for securing edges, protective gloves, and the subsequent aggregate or soil layer specified in the project design.

Yes. Wear gloves and eye protection when handling rolls, avoid creating sharp tears or loose wrinkles, and store rolls in a dry shaded area away from direct heat and moisture to preserve performance. Follow standard site safety rules for construction materials.

Post-installation, inspect for wrinkles, folds, or misalignments and correct them promptly. Ensure edges remain anchored and that drainage layers beneath remain unobstructed. No ongoing maintenance is typically required beyond routine site inspections.

Comparative options available on Fepy.com include: Geotec Exeed 250GSM Geotextile (higher strength for heavier loads) https://fepy.com/product/geotec-exeed-250gsm-geotextile-5-6m-x-150m-uv-resistant, Geotec 200GSM Non-Woven Geotextile (similar GSM with different manufacturing, for different project requirements) https://fepy.com/product/geotec-200gsm-non-woven-geotextile-5-6m-x-150m, and Geotec Exeed 150GSM Geotextile (lighter option for less demanding applications) https://fepy.com/product/geotec-exeed-150gsm-geotextile-5-6m-x-150m. These provide a basis for evaluating strength, cost, and suitability for your project.

Key value drivers include the GSM (higher GSM = stronger reinforcement), roll size (840 m2 per roll reduces seamwork), UV and chemical resistance (durability in harsh environments), and installation needs (ease of handling and speed). The right choice balances project requirements, durability, and total cost per square meter.

Avoid insufficient overlaps, failing to remove debris from the subgrade, leaving wrinkles or folds, not securing edges, and neglecting drainage considerations. Also ensure you do not stretch the fabric excessively during placement, and always follow the project’s design specifications for layer thickness and compaction.