حلقة تثبيت البراغي المصنوعة من الحديد المجلفن قياس (10mm) تباع (Per KG)

GI stands for galvanised iron/steel. The washer is hot-dipped galvanized to provide corrosion resistance and longer service life in various environments.

Key specs: designed for a 10 mm bolt (fits M10), made from hot-dipped galvanized steel for corrosion resistance, and it is described as burr-free and safe to handle. It is packaged and sold by weight (per kilogram).

It is packaged and sold per kilogram, meaning the quantity you get is based on weight rather than a fixed count.

Common uses include general maintenance, scaffolding, industrial constructions, automotive applications, and other heavy-duty fastening scenarios where load distribution and surface protection are important.

Place the washer between the bolt head or nut and the mating surface to distribute the load. Ensure the surfaces are clean and flat, avoid burrs, and tighten to the appropriate torque for the bolt and material to prevent loosening and surface damage.

Choose this galvanized washer when corrosion resistance in general environments is needed and when a cost-effective solution is acceptable. If you require higher corrosion resistance or appearance, consider stainless steel flat washers available on Fepy for different environments and budgets.

Hot-dipped galvanized washers offer good corrosion resistance for many outdoor and damp environments, typically at a lower cost. Stainless steel washers offer superior corrosion resistance in harsher or highly corrosive environments but at a higher price.

Yes, the hot-dip galvanized coating provides corrosion resistance suitable for many outdoor and semi-outdoor applications. For extremely corrosive environments, evaluate stainless steel alternatives.

Durability is influenced by the environment (moisture, chemicals, and exposure to harsh conditions), load conditions, surface finish, and proper installation. The galvanized coating helps protect against corrosion over time.

Yes. The product is designed to be burr-free and safe to handle, but as with any hardware, wear gloves when assembling and inspect for any sharp edges or burrs before installation.

If you’re comparing options, you can consider these alternatives on Fepy: - Stainless Steel Flat Washer 10mm: https://fepy.com/products/stainless-steel-flat-washer-10mm - Galvanized Flat Washer 12mm: https://fepy.com/products/galvanized-flat-washer-12mm - Galvanized Flat Washer 8mm: https://fepy.com/products/galvanized-flat-washer-8mm