طين بوليمر جيوتو (DAS) الذكي (57 g) يُخبز في الفرن، ألوان قابلة للمزج، غير سام، آمن للأطفال، يُنمّي الإبداع، مثالي للتشكيل وتنمية المهارات الحركية، بيج - مجموعة من قطعتين

Key features include skin-tone friendliness (blend beige with white, caramel, or pink to match human tones), stable colour after baking (won’t yellow in normal display conditions), detail retention (fine lines stay visible after curing and light sanding), and robustness for small accessories like badges and keyrings. You can finish with polish for shine or seal with varnish to protect surfaces and colours.

1) Knead and condition the clay until soft and pliable. 2) Shape, sculpt, or mold your design. 3) Bake in a conventional oven following standard polymer clay guidelines (see below). 4) Allow to cool completely, then sand lightly if needed and apply a finishing coat if desired.

Bake in a conventional oven at a safe, low temperature (typical range ~110°C/230°F) for a duration appropriate to the thickness of your piece (commonly 15–30 minutes per 6 mm of thickness). Always let pieces cool completely before handling. If in doubt, follow standard polymer clay baking practices and use a dedicated oven thermometer.

This beige DAS Smart clay blends well with white, caramel, or pink to create a wide range of skin tones. Start with the beige base and gradually add small amounts of the other colors, kneading thoroughly until you reach the desired shade.

Baked pieces retain many details and are strong enough for lightweight accessories like badges, brooches, and key rings. For items that endure more stress, consider applying a protective varnish or sealant to improve longevity and scratch resistance.

You can polish baked pieces for a natural shine or seal them with a clear varnish or acrylic sealant to protect colours and surfaces. Allow the piece to cure fully before applying any finish, and follow the sealant’s instructions for drying times.

The DAS Smart clay is described as non-toxic and suitable for crafts. As with any modeling material, supervise children during use, avoid ingestion, and ensure adults assist with baking and handling of hot items. Keep away from small parts for very young children to prevent choking hazards.

Store the two 57 g beige blocks in a cool, dry place, ideally in an airtight container or resealable bag to prevent drying out. Keep away from direct sunlight and heat sources to maintain color stability and pliability.

DAS Smart stands out for skin-tone blending, color stability, and fine-detail retention after baking, which can differ from other brands like Sculpey III or Fimo Soft. If you’re comparing options on Fepy, you can explore polymer clays in the general collection to see how texture, color range, and bake behavior differ: https://fepy.com/collections/polymer-clay. For brand-specific comparisons, you can browse Sculpey and Fimo collections here: https://fepy.com/collections/sculpey and https://fepy.com/collections/fimo.

Essential tools include a good modeling knife or craft knife, smoothing tools, fine sandpaper (for finishing), a small rolling pin or acrylic rod for flattening, and lightweight sealants/varnishes for finishing. Having a dedicated oven thermometer helps ensure accurate baking temperatures.

This item is listed as a standard product on Fepy, and you can expect the platform’s general return and value options to apply. If you’re weighing value, consider that you receive two blocks (57 g each) enabling broader practice and a wider range of color-mixing options, which can reduce the need to buy additional colors upfront.