ألواح الجبس العادية جيبرلين من ( Gyproc ) لتلبيس وتبطين الأسطح الداخلية - قياس (12mmx2400x1200)

Ensure proper handling to avoid damage to edges and surfaces. Store the boards flat in a dry area and protect them from moisture exposure during storage and installation.

While it provides basic acoustic insulation, it is not specifically designed for high soundproofing performance. For better sound insulation, consider Gyproc SoundBloc or similar products.

The Gyproc Gypline Regular Board meets EN 520:2004 standards for gypsum plasterboards, ensuring quality and performance consistency.

The board comes with tapered edges (TE) or square edges (SE), allowing flexibility in jointing and finishing based on project requirements.

No, the regular board is not moisture-resistant and is ideal only for dry internal environments. For wet areas, moisture-resistant or water-repellent boards are recommended.

The board has a gypsum core encased in durable paper liners, offering good thermal insulation (thermal conductivity: ~0.21 W/mK) and fire resistance in standard applications.

It is designed for internal drylining applications, including walls, ceilings, and partitions, providing a smooth surface for painting or finishing.

The board measures 12mm in thickness, 1200mm in width, and 2400mm in length. It weighs approximately 7.5-9.5 kg/m², depending on the specific variant.

Applications: Ideal for internal partitions and ceilings in residential and commercial buildings with standard fire, structural, and acoustic requirements.

Installation: Screws should be placed at least 13 mm from cut edges and 10 mm from bound edges; stagger joints by at least 600 mm.

Edge type: Typically tapered edges for seamless jointing.

Suitable for direct decoration with finishes like plastering or jointing compounds.

Thermal conductivity: Approximately 0.16 W/m·K, contributing to energy efficiency.

Fire resistance: Complies with BS 476 and classified as Type A under EN 520 for general use in non-fire rated applications.