بلاطات السقف المستعار المعدنية جيبروك (Saint-Gobain) سماكة (0.6MM) قياس (600X600MM) موديل (Dot-18) مكونة من (22PCS) قطعة

It’s a clip-in metal ceiling tile with a modern Dot-18 pattern. Each tile measures 600x600 mm, designed for a neat, contemporary ceiling finish.

Key specs: 600x600 mm tiles, 22 tiles per box, Dot-18 pattern, lightweight for easy handling, designed to resist moisture and chemicals, and optimized for sound absorption in interior ceilings.

A box contains 22 tiles. Each tile covers 0.36 m², so one box covers about 7.92 m² of ceiling area.

Install requires a compatible clip-in ceiling grid. Align each tile with the grid and press or clip into place until it engages. Cut tiles as needed at edges using tin snips, wear gloves, and work from one corner to the opposite side for a clean finish. Ensure the area is dry and the grid is level before starting.

Ideal for residential and commercial spaces like offices, restaurants, shops, and other areas needing a modern, durable ceiling with good sound absorption and moisture resistance.

For different patterns and densities, you can compare: Dot-12 pattern tiles (often a lighter texture) and Dot-24 pattern tiles (often with a denser look). These variants are available on Fepy at the following product pages: https://fepy.com/product/gyproc-clip-in-metal-tile-dot-12-600x600mm and https://fepy.com/product/gyproc-clip-in-metal-tile-dot-24-600x600mm. Dot-12 may offer a subtler texture, while Dot-24 provides a more pronounced pattern; choose based on your ceiling design goals and acoustic needs.

You’ll typically need a compatible clip-in ceiling grid, a level to ensure grid accuracy, tin snips for edge cuts, measuring tape, a pencil or marker for layout, and gloves for handling metal tiles.

The tiles are designed for interior use, offering moisture resistance and good durability for commercial and residential interiors. Always install in well-ventilated areas and follow standard workplace safety practices when handling metal ceiling materials.

Yes. Because the tiles are clip-in, you can remove a single damaged tile by disengaging its clips from the ceiling grid and replace it with a new Tile Clip-in-Metal Dot-18 tile, then re-engage the clips to secure it.

Regular dusting with a soft cloth or low-pressure vacuum is typically enough. If needed, wipe with a damp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners that could scratch or dull the surface.

Clip-in-metal tiles like Dot-18 offer durable finish, quick installation, and good longevity due to moisture resistance and low maintenance. When you factor in installation time and durability, they can be a cost-effective choice relative to some traditional suspended ceiling options. For a direct price/value comparison, see the product pages for Dot-18 and the Dot-12 or Dot-24 variants on Fepy.