قناة التثبيت المعدني جيبروك (Saint-Gobain) قياس (103-FC-50) طول (2400MM)

Key specs include: 2400 mm length; corrosion-resistant metal construction; lightweight and rigid for strong reinforcement; pre-drilled holes for easy, screw-free installation; edges are thin to be concealed by plaster skim and jointing compounds; suitable for internal and external plasterboard applications.

Prepare the wall or ceiling surface, cut the channel to the required length with metal snips, align it in the desired position, and clip it into place. Use jointing compounds to seal joints and concealed edges. The pre-drilled holes allow screw-free installation, but you can add screws or nails if additional security is needed for your project.

You’ll typically need metal snips to cut the channel, a tape measure or chalk line for alignment, plaster jointing compounds and trowels for finishing, a drill or hammer for any optional anchors, and personal protective equipment like gloves and safety glasses.

Yes. It is designed to be easily cut to custom lengths using metal snips. After cutting, deburr any sharp edges with a file or sandpaper to ensure a smooth finish before installing and skimming with plaster.

The Gyproc FC channel offers rigid, metal reinforcement that generally exceeds traditional timber in stiffness and long-term performance. It provides reliable support for plasterboard joints and fixtures with corrosion resistance and easier installation in many plasterboard systems.

It is designed to work with jointing compounds and plasterboard finishing products. It can also be used in conjunction with masonry anchors where adhesives or additional fasteners are required, depending on the specific project.

Yes. The design is intended for use in a range of plasterboard applications and wall constructions, including typical internal and exterior installations where plasterboard is involved.

Use it to reinforce plasterboard joints in walls and ceilings, support lightweight fixtures, and provide a stable metal frame that can be skimmed over with jointing compounds for a clean, concealed finish.

Measure the installation run (length of wall or ceiling section) and account for any joints or fixtures that require reinforcement. For longer runs, you may need multiple channel sections connected end-to-end. Always plan for overlaps at joints and ensure you have enough pre-drilled holes spaced appropriately for secure, screw-free installation.

Handle with care to avoid sharp edges; wear gloves to protect hands from metal edges; use proper cutting tools and follow safe cutting practices; ensure the work area is clean and that cutting waste is disposed of properly. If you’re unsure about installation, consult a qualified professional.

This channel provides rigid, corrosion-resistant reinforcement with pre-drilled holes for screw-free installation, plus edge concealment for a smooth plaster skim finish. It often offers faster installation and stronger joint reinforcement than traditional timber framing, and it’s designed to integrate smoothly with jointing compounds and plasterboard systems available on Fepy.com.

If you’re exploring options, you can compare similar Gyproc fixing channels on Fepy.com, such as Gyproc 103 FC 50 1200mm channel, Gyproc 103 FC 50 3000mm channel, and Gyproc 81 FC 50 2400mm channel. Their product pages provide specifications and usage guidance to help you decide which length and variant best fit your project. Example URLs (please verify on the site):

- https://fepy.com/product/gyproc-103-fc-50-1200mm-channel - https://fepy.com/product/gyproc-103-fc-50-3000mm-channel - https://fepy.com/product/gyproc-81-fc-50-2400mm-channel